pulling engine

[rjeffery]

i have diconnected all the electronics up front and placed them on the engine,i would like to pull the engine with all the electronics intact.it looks very tight but would i be able to leave the intake mani and the exhaust mani on when i pull the engine.thanx

[Water4fire]

Just take the 5 min. to pull off the intake mani.

[rjeffery]

so you figure to pull intake instead of exhaust.thanx

[rjeffery]

just took a look at it and yea you are right.hey you know the torx specs off hand for the intake mani.thanx

[darakuja]

three days ago i pulled out the engine of Rxp-x. removing intake mani. will take you a few minutes 4 or 5 bolts

[Water4fire]

three days ago i pulled out the engine of Rxp-x. removing intake mani. will take you a few minutes 4 or 5 bolts

9 total

7 manifold
2 Fuel rail

[rjeffery]

yea thanks i also have shit load of wires on the engine since i am changing over the hole elec system also.this will help out do to the fact i can get all this elec crap out of my way.thanx for guys help.thanx

[darakuja]

6 small engine ground wires .should i put them back in the same places ?

[rjeffery]

i notice by quick glance that i would have to remove 2 ground wires if i remove the intake mani.why woul i have to remove the 2 screws that hold the injectors in it seems to me that if unplug all connectors and remove the 7 bolts it should all come together.thanx

[MSRXP]

i notice by quick glance that i would have to remove 2 ground wires if i remove the intake mani.why woul i have to remove the 2 screws that hold the injectors in it seems to me that if unplug all connectors and remove the 7 bolts it should all come together.thanx

Remove the fuel rail. It does two things: Removes the fuel and better allows you to maneuver the IM. Take it off before you break something.

[MSRXP]

Also, you want to remove the injectors and wrap them up and store them away in a cool dry place. Do the same for the rail.