DIY intake? 22 RXPX

[ptscon]

Has someone checked how much space there is under the intake manifold if the stock intake tube is removed? 4" hose really won't fit through there anymore?

[Colorado Jr]

I don't have the back seat but the black plastic cover goes right over it no issues .

Hmmm good to know. I will look into that option for sure.

[GoneRXT]

Will the back seat fit over that?

I don’t have the back seat but the black plastic cover goes right over it no issues .

[guybb3]

I like ordered this 6 inch cover off Amazon , keeps things sealed when jumping waves out in the ocean . Not to mention you can access the oil filter and check on things in the back of the hull .

Will the back seat fit over that?

[moparguy]

5inch hole, 6inch Frogskinz eliminates worry of water intrusion

[Colorado Jr]

I like ordered this 6 inch cover off Amazon , keeps things sealed when jumping waves out in the ocean . Not to mention you can access the oil filter and check on things in the back of the hull .

How safe is that when the ski is flipped or heavy amounts of water get splashed on it?

[GoneRXT]

I like ordered this 6 inch cover off Amazon , keeps things sealed when jumping waves out in the ocean . Not to mention you can access the oil filter and check on things in the back of the hull .

[Water4fire]

Yes they work amazing. I have a 6 inch hole drilled in to my engine compartment cover and holes under front cowlings. Oh and before people get there undies all in a bunch. That cover is only a $100 to replace.

[John's truck]

Since the hull is sealed up pretty tightly, do you really see any performance gains with these shorty intake pipes?
I have heard that you can pick up 100 rpm or so. With just a SCOM, I'm already past the 8040 rpm soft limiter. I don't believe that my ski would run any more rpm with this, might actually drop if the I-control came more into play. Do you find that you need to raise the rpm limit to take advantage of this mod?

I can’t answer to that. I put the 3-to-4” shorty intake on my wife’s 300 (with a SCOM) and she literally never looks at RPM while she rides . I built a 3” shorty for my GPRXP and when it’s finished I’ll do a back to back comparison and swap the 3” to the 4” and compare logged runs.

[Team Bilford]

Since the hull is sealed up pretty tightly, do you really see any performance gains with these shorty intake pipes?
I have heard that you can pick up 100 rpm or so. With just a SCOM, I'm already past the 8040 rpm soft limiter. I don't believe that my ski would run any more rpm with this, might actually drop if the I-control came more into play. Do you find that you need to raise the rpm limit to take advantage of this mod?

[Colorado Jr]

DIY intake? 22 RXPX

Do you need the 4 inch joining pipe? If so! Do t forget.

I have that ordered from eBay now. But I just want to confirm this is the right parts to get along with the 4 in pipe. The only reason I'll get this is from what everyone is saying about the 4 ply.

[Water4fire]

Do you need the 4 inch joining pipe? If so! Do t forget.

[Colorado Jr]

That is a reducing elbow

Perfect that website is here in Colorado too I might order this.

[Water4fire]

That is a reducing elbow

[Colorado Jr]

DIY intake? 22 RXPX

Double post sorry