Above Forum Ads

Collapse

Announcement

Collapse
No announcement yet.

2016 rxt260 Build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2016 rxt260 Build

    I know it's been done a million times before but I just wanted a place to document what I have going on with the ski this winter. End goal is 80+ on mostly fresh water river riding.

    I know, buy a 300 they say. Unfortunately we all have to work with what we have available to us. Hope to have a 300 along side of her one day[emoji846]

    Ski has been through some tough times like getting beached into a fallen tree and the exhaust resonator melting causing the bilge pump to work overtime but no major issues so far, only oil changes, plugs and a battery.

    Ski ended last year with a 90* intake, free flow exhaust and an 8650 tune with an Impros worked 14/20 solas prop to keep rpm's at 8500. I was all over the redline with the out the box 14/19. Saw 75 on the dash at the end of the season. With 3/4 tank of gas.

    List of mods going on this winter

    Fizzle X4 wheel
    Fizzle supercooler with dedicated dump
    Side mount I/C relocation (300 location)
    Fizzle I/C piping with Tial BOV
    Riva IMUK
    Riva exhaust manifold spacer
    Riva through hull exhaust
    TDR water box
    Retainers
    1100cc injectors
    Catch can
    Stainless ring
    Solas 15/19r
    WJP ÔÇ£ram airÔÇØ hull vents
    Homemade under seat vent
    Ride plate holes filled
    Dashpac fuel and boost monitoring

    Tuning under way via HP Tuners remote tuning, full custom map

    Couple non performance mods

    Grip gear seat
    Carbon wrapped panels
    Worx sponsons
    Ceramic coated

    Update with more pics on post 10
    Update WJP ram air vents installed post 21
    Update on tuning and some pics post 22
    Attached Files
    Last edited by Chefrey; 02-20-2023, 08:10 PM.

  • #2
    Originally posted by Chefrey View Post
    I know it’s been done a million times before but I just wanted a place to document what I have going on with the ski this winter. End goal is 80+ on mostly fresh water river riding.

    I know, buy a 300 they say. Unfortunately we all have to work with what we have available to us. Hope to have a 300 along side of her one day[emoji846]

    Ski has been through some tough times like getting beached into a fallen tree and the exhaust resonator melting causing the bilge pump to work overtime but no major issues so far, only oil changes, plugs and a battery.

    Ski ended last year with a 90* intake, free flow exhaust and an 8650 tune with an Impros worked 14/20 solas prop to keep rpm’s at 8500. I was all over the redline with the out the box 14/19. Saw 75 on the dash at the end of the season. With 3/4 tank of gas.

    List of mods going on this winter

    Fizzle X4 wheel
    Fizzle Gen X cooler
    Riva I/C piping
    Riva IMUK
    Riva through hull exhaust
    TDR water box
    Retainers
    1100cc injectors
    Catch can
    Stainless ring
    WJP “ram air” hull vents
    Homemade under seat vent
    Ride plate holes filled
    Tuning will happen once complete

    Couple non performance mods

    Grip gear seat
    Carbon wrapped panels
    Worx sponsons
    Very nice! Put that intercooler in the side like the 300 so you will have a more reactive throttle !

    Comment


    • #3
      Can you post some pics of the WJP vents?
      2016 RXPX-300, ET-142, all supporting mods
      2018 RXTX-300, Box Stock

      Comment


      • #4
        Originally posted by jetplane View Post
        Very nice! Put that intercooler in the side like the 300 so you will have a more reactive throttle !
        I have been looking for a relocation kit for it but have not been able to find one. If you can point me in the right direction I'm all for it. Parts are not as easy to come by for these things anymore.

        Comment


        • #5
          Originally posted by moparguy View Post
          Can you post some pics of the WJP vents?
          As soon as they get here I will, shipped Tuesday. They are made for the 300 rxtx specifically but I'm trying them out on mine to see if they'll fit. Bishop has been great to work with during the process, being very flexible with letting me return if they don't.

          Comment


          • #6
            Originally posted by Chefrey View Post
            I have been looking for a relocation kit for it but have not been able to find one. If you can point me in the right direction I’m all for it. Parts are not as easy to come by for these things anymore.
            I have one if you want !

            Comment


            • #8
              Thanks but I think I'm going to run no blow off valve, I have the foam block and plan on using the gen x cooler with 300 piping

              Comment


              • #9
                Originally posted by Chefrey View Post
                Thanks but I think I’m going to run no blow off valve, I have the foam block and plan on using the gen x cooler with 300 piping
                If you want I can send you without tial and you can tap it .You can't use the 300 pipes since the diameter is different .

                Comment


                • #10
                  Originally posted by jetplane View Post
                  If you want I can send you without tial and you can tap it .You can't use the 300 pipes since the diameter is different .
                  What's your best dollar price off eBay for them with blow off valve shipped to 21651 in the us?You're link to eBay is not in English.

                  Comment


                  • #11
                    Hello I can give you them for 320 dollars shipped to your home .

                    Comment


                    • #12
                      Originally posted by jetplane View Post
                      Hello I can give you them for 320 dollars shipped to your home .
                      Shoot me your email address for pay pal, where are you shipping from?

                      Comment


                      • #13
                        [email protected]. I'm shipping from italy . Sorry I wrongly said dollars before and . Could you send me 320 euro as net to me please , thank you

                        Comment


                        • #14
                          2016 rxt260 Build

                          Originally posted by jetplane View Post
                          [email protected]. I'm shipping from italy . Sorry I wrongly said dollars before and . Could you send me 320 euro as net to me please , thank you
                          Just sent the money via PayPal ended up being 368 dollars, please share tracking once you ship. Thanks!

                          Comment


                          • #15
                            Originally posted by Chefrey View Post
                            Just sent the money via PayPal ended up being 368 dollars, please share tracking once you ship. Thanks!
                            Thank you Sir could you please send your adress , mail and mobile number ?

                            Comment

                            Working...
                            X