Fuel Controller Installation Instructions

[Green Hulk]

Thanks goes out to bttek1 for writing this up.

[meirvin]

for those would would rather have a PDF

[Green Hulk]

sweet! thanks Mike!

[shhr]

OK I am not very smart I printed off the instructions and the way my fuel controller is these instuctions dont make since

I have 3 wires 2 of them have 2 conections and 1 is different with a cap on the plug.

picture 1 is easy but after that I cant make since of it please help and pictures would be great as I am not very smart this is the only thing keeping me from being ready to test so HELP

[Shibby1485]

the one with the cap ignore... that's for Brian to program it...

now you have two pigtails with 2 plugs on each pigtail...

you need to complete the loop... you take a stock plug out, and put a fuel controller plug IN... now the stock plug plugs into the extra plug on the pig tail.

furthermore...

the shorter of the pigtails.. unplug the stock MAP sensor plug, and plug in the fuel controller, and plug the stock plug into the piggy back harness female plug

next... the longer of the pigtails...Cam sensor on the cylinder head... unplug the stock plug and plug the fuel controller in.. then take the old stock plug and plug it into the female plug on the pigtail

it's just re-routing the loop.. the fuel controller plugs go into the ski sensors... the old stock wiring harness plugs go into the pigtail female plugs.

make sense?

[shhr]

OK I think I got it The map sensor is it the first (TOP) plug on the back side of the ECU I know which one is the cam sensor

thanks for helping I could not figure out the extra(programing) plug

[Green Hulk]

The MAP sensor is located between the #3 and #2 intake runner.

[shhr]

thanks for the help guys I installed it this afternoon I looked in the manuel for the locations my book called one a CAP sensor vs CAM and I was looking in the wrong place for the MAPS sensor sometimes I need pictures now I am ready to hit the water as soon as my new 15/19R gets here maybe Wednesday

[jetskibill9999]

The MAP sensor is located between the #3 and #2 intake runner.

jerry my fuel controller keeps doing one, do i need it ?

[Green Hulk]

Bill, send Brian an email telling him of your issues so he can get them sorted out [email protected]

Thanks!