Voltage conversion chart for Rude Controller.

[Timba_rxp23]

cool

[Helinut]

Thanks Snoman and Cal, The 1st sled we put the Rude Controller on is starting to run much better. We are still quite lean at 3000-4000 RPM. We probably will add more fuel in the 1-2.5 volt range to see what happens. 7800 -7900 RPM is at 11.7. Next we will swap props and get closer to the limiter and see where we are.

[Snoman]

Here you go guys! This should probably be made a sticky.

1.0 = 16" vacuum
1.2 = 14" vacuum
1.3 = 12" vacuum
1.4 = 10" vacuum
1.5 = 8" vacuum
1.6 = 6" vacuum
1.7 = 4" vacuum
1.8 = 2" vacuum
1.9 = 0 psi
2.0 = 1 psi
2.1 = 2 psi
2.2 = 3 psi
2.3 = 3.5 psi
2.4 = 4 psi
2.5 = 5 psi
2.6 = 6 psi
2.7 = 7 psi
2.8 = 7.5 psi
2.9 = 8 psi
3.0 = 9 psi
3.1 = 10 psi
3.2 = 10.5 psi
3.3 = 11 psi
3.4 = 12 psi
3.5 = 13 psi
3.6 = 14 psi
3.7 = 15 psi
3.8 = 16 psi
3.9 = 16.5 psi
4.0 = 17 psi
4.1 = 18 psi
4.2 = 18.5 psi
4.3 = 19 psi
4.4 = 19.5 psi
4.5 = 20 psi
4.6 = 21 psi
4.7 - 22 psi

Here is the voltage chart for the Rude controllers...Thanks to Cal for taking the time to make this possible....