"How To" Removal of supercharger by Sean Coleman

[jamalama]

Just a confirmation question please:

- the pdf instructions on page 1 show a 2005+ model year.

Can I "assume" that this instructions are exactly the same for a 2004 GTX 185 SC model?

Thanks

[5.7 silverbullet]

I'm going to do this over the weekend hope it goes well. Thanks for the info. Do you all think I should just upgrade to the x model super charger and 42lbs injectors

[Snoman]

I'm going to do this over the weekend hope it goes well. Thanks for the info. Do you all think I should just upgrade to the x model super charger and 42lbs injectors

is your ski stock??If so then sure,youll have to tweek your prop some OR go to a 14/19 which i would do over messing with the stock prop..

[5.7 silverbullet]

I'm going to do this over the weekend hope it goes well. Thanks for the info. Do you all think I should just upgrade to the x model super charger and 42lbs injectors

is your ski stock??If so then sure,youll have to tweek your prop some OR go to a 14/19 which i would do over messing with the stock prop..

I just ordered all the stuff for my 06 RXT, 42lb injectors, new X charger, new prop, oil, plugs, O rings filter, bunch of filters and oil. Also new seat cover for my 05 RXT and stepping pads Jerry is going to rebuild the stock supercharger on the 05 its fast enough stock for the everyday machine!!! Thanks for all the help!! Note the prop I ordered is the Solas SRX-CD-15/20 Don't now much about props Hope it will work!!

[Azuras]

Cheers for the write up

My issues so far are

Band on exhaust wont release, the nut is all the way out but its stuck in the closed position

supercharger wont release, all three bolts have been removed. It can be rotated but does not just slide on out (and the rotation requires force)
I have tried rotating the engine to see if the gear is holding onto the clutch gear but still the same...
i have tried a lever, still not budging....

and then theres the dropping crap under the engine
I FUCKEN LOVE DROPPING MY SHIT UNDER THE ENGINE!

[Tdi Guy]

Are there any threads on how to change out the SC washers? Just picked up a 2007 rxt with 30 hrs and want to do the washers ASAP.

[SuperCharged67]

I would send it to jerry for a full rebuild.

[Tdi Guy]

I want to do that at the end of the season but have a set of washers that came with the ski. Is there a how to on doing this?

[ashnic]

I have a 06 GTX 185HP..how long does it usually take to pull a Super Charger..I see that Jerry starts rebuilding them the day he gets them..

[2kflhr]

Sean, thanks for the great write up!
I used it as guide to pull the SC off of my '04 GTX LTD in about 45 minutes. I'm sure the next time it will be about a 20 minute job. I shipped it to Jerry and he turned it around and on its way back.

[dennyboy]

2005 sporster 150 215hp

is there much difference to removing the SC out if the actual seadoo boat over the seadoo ?

Sean, thanks for taking the time to put this together for us.

The tools to work on your supercharger are available here:http://www.4-tecperformance.com/inde...index&cPath=11

Jerry

[Snoman]

no theres not...actually theres more room in the boats to remove it than there is the skis....

[GreenRedRXT2005]

I'm mechanically inclined but was fairly intimidated by this task. I read through the instructions two or three times and then referred back to them once or twice while pulling the first of two superchargers. These instructions made it very easy. By time I got to the second one the total time cut down by more than half...maybe 30 minutes total. Thank you!

Hoping to box them up and send them to Jerry as soon as I figure out if they're up and running.

[jetskifullsend]

Has anyone seen any good youtube videos or detailed instructions on how to remove the supercharger on a 2013 seadoo gtr? I've seen the instructions on the first page of this thread but that seems to be an older model. I am looking for instructions on a newer model seadoo. Can't seem to find any.

Any help is greatly appreciated!