How To: Wire devices to fuse boxes on 2010+ DooÔÇÖs (Bilge Pumps, LC-1ÔÇÖs, LM-2, etc.)

[gsabadosa]

If you call Riva Racing call their technical support number. When I explained what I needed they referred me to the speed module kit RS110-90-SCOM-11-W which includes the wiring harness. They are able to order only the wiring harness for me over the phone (not through their website). The harness was $14.99, a little pricey but it saves me from having to build my own wires.

[jpt7779]

2012 models and newer, female terminal connectors, found by RXT-260-DOO:

http://www.waytekwire.com/item/30037/METRI-PACK-280-SERIES-TANGED-FEMALE/

OEM part number Info

http://partsfinder.onlinemicrofiche....HARNESS---MAIN

Look at REF Number 690 part number 710 000 890 Female Terminal

[Misa]

Fuse box on a 14' RXT-X. Planning on giving Riva a call tomorrow and see what they got. Waytek requires a minimum order of 50 terminals, 100 wire seals and still need the wiring. I'm looking into switched powering two innovate gauges. From looking at the pictures looks like i'll need two jumpers and 1 purple wire going to each device then the fuses at their location on box?

[EVN81]

More info:

http://www.greenhulk.net/showthread.php?t=230394

[Misa]

The metripack 280 terminals can be found on ebay as well. 25 terminals and 25 seals came out to $15 shipped, got the crimper as well. Looking forward to the project!

[SinWolf]

How about this one?
Tyco# 1-1719506-1

http://www.te.com/catalog/bin/TE.Connect?C=1&M=BYPN&TCPN=1-1719506-1&RQPN=1-1719506-1

WOW, that is it!

I spent many hours searching for that part...........

Rivas wire kits are outrageously expensive but, time is money, once in hand it took me less than 5 minutes to hook it all up!

Guys... I need some help here... (2010 model)...


The rubber seal I guess is this one:

http://za.rs-online.com/web/p/products/3957599/

But the connector itself... There's so many different part numbers and I cant see what the difference is and which one is the correct one:

http://za.rs-online.com/web/p/pcb-connector-contacts/7181140/

http://za.rs-online.com/web/p/pcb-connector-contacts/7181131/

http://za.rs-online.com/web/p/products/7268988/

http://za.rs-online.com/web/p/products/7268981/

http://za.rs-online.com/web/p/products/7202433/

http://za.rs-online.com/web/p/products/7181143/

http://za.rs-online.com/web/p/products/7180819/

They are VERY cheap through RS Components... But I need to know which one

Thanks

[tchies]

GM metri pack 280 are the ones for the late model skis - just wired a 2016 rxtx 300

[SinWolf]

Guys,

After viewing the technical drawing for the terminal, with all listed part numbers, it was easy to get the correct ones from RS Components...

Drawing: http://www.te.com/commerce/DocumentD...%7F1-1719506-1




And I received my terminals:

[krouchchocolate]

Anybody know if the GM metri pack 280 will work for 2011 model skis?

[user83]

Hello guys i need 10 2010 terminals with seals has somebody to sell please or point ne to buy
Thank you

[SinWolf]

Good day,

I ordered mine from the South African RS Components website (http://za.rs-online.com/web/) ... But RS Components is worldwide, so you should have a local RS Components website where you could order from??

These terminals are cheap as chips...

Connector is RS parts number: 718-1162
Seal is RS Part number: 719-0282

Hope this helps

[SinWolf]

And now... I need the connectors for my 2022 FishPro... Does this mean I need to go through the whole research exercise again

Or is there somebody that can point me straight to the correct product

[SinWolf]

And now... I need the connectors for my 2022 FishPro... Does this mean I need to go through the whole research exercise again

Or is there somebody that can point me straight to the correct product

OK... Looks like the Aptiv (previously Delphi) Metri-Pack 280 Series (as per the "other" post) is still relevant...