Above Forum Ads

Collapse

Announcement

Collapse
No announcement yet.

How To: Wire into the MPEM for switched power source.

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How To: Wire into the MPEM for switched power source.

    well ive been promising some instructions so here they are
    the small pins are number 278000995 there $2.00 a peice. (buy a extra)
    follow the steps, it should take less then a hour.
    Attached Files
    Daniel
    current running builds
    1998 seadoo XPL with a 4tec supercharged motor
    1999 Yamaha SUV with a 4tec supercharged motor
    future projects
    1999 Yamaha SUV with something insane

  • #2
    Wow!!!!
    1992 Seadoo GTX 1996 Seadoo XP

    Comment


    • #3
      You can get those clips from Napa in packages of 5 for about $3.
      They also sell the rubber gromets that need to seal the back side of the plug as well.

      Thanks for taking the time to post this!
      My modified lightened and balanced clutch has held up over 4 hours now!!!
      Now as soon as I write this it will break in the driveway!

      Comment


      • #4
        Thanks for the How-To. I made it sticky and moved it to the technical info forum.

        Comment


        • #5
          that is some great info and those pics really help out. THANKS!
          2004 RXP (2Rude)
          1996 GSX

          Odysseawatersports.com

          Comment


          • #6
            I have a purple wire on pin 25, also I can't find the pins at NAPA referencing that part number. Can I just tap the purple wire (what is it).

            Thanks
            Stevew
            2005 RXP
            Fizzle H E Intercooler, Riva thermostat,3 Rude Supercharger, Riva RRFPR, Bosch 50# injectors, Riva Racing ECU, Dynojet CMD system, Riva valve upgrade, Riva pistons, rings, Impros 15/22 prop, Pro nozzle-82mm, SS ring, RR engine mount. Riva rear air, Riva pro blockoffs, Ride plate holes filled, Riva Pro sponsons, finger throttle kit, Riva Grate, Groco strainer, bilge pump, Riva rear exhaust, Riva waterbox , Jim's ride plate mod, Norcross depth finder, Garmin Montana GPS,

            Comment


            • #7
              u want 2-22... that is the empty spot for it... there's no female wiring pin in there at all... u gotta add one.
              EZ Dock of Long Island
              Sunstream Boat Lifts
              516-468-DOCK
              Long Island, NY

              Comment


              • #8
                Is there a fuse spot for 2-22? I did this, but I have no power on the line????

                Comment


                • #9
                  Awesom job thanks for the great write up. Just cusrious I have an 04gtx/sc is this connector the same?
                  Thanks
                  John
                  UNISHIPPERS is the source to ship motors, skis, etc. Call I can probably set you in the right direction.
                  316-943-1468 fax 316-941-9719
                  e-mail [EMAIL="[email protected]"][email protected]
                  2015 FX-SVHO All stock and 71.1 on GPS love it.
                  2004 GTX wifes ski stock 4" air and RXP ecu
                  2005 GPR SOLD ported (west coast Porting, balanced (osiedbill), dplate, keyway, jims plate there is more dont' recall everything
                  West Coast Porting The place to make your machine be the best it can be
                  www.wcporting.com

                  Comment


                  • #10
                    Originally posted by 04gtxsc View Post
                    Awesom job thanks for the great write up. Just cusrious I have an 04gtx/sc is this connector the same?
                    Thanks
                    John
                    John... this write up Daniel did is actually WITH an 04 GTX SC motor and electronics. this is in his XPL 4-tec, and he used a 185 motor and electronics for the build.. so what u see here is exactly what u will see on your ski.

                    regardless, all the MPEMs are the same (except 2007) ... only variation is the options and fuse terminals that are being used or not
                    EZ Dock of Long Island
                    Sunstream Boat Lifts
                    516-468-DOCK
                    Long Island, NY

                    Comment


                    • #11
                      What a great thread! Great job Dan!!!
                      Mark
                      ÔÇ£
                      Silence is golden, but duct tape is silver.ÔÇØ

                      Comment


                      • #12
                        Originally posted by idizzy View Post
                        Is there a fuse spot for 2-22? I did this, but I have no power on the line????
                        should be fuse #2..... tryin to remember actually on certain skis of it needed to be activated on BUDS to get power there i had it wired in one place then another and one of them needed to be activated on BUDS kinda like the depth finders and stuff...
                        EZ Dock of Long Island
                        Sunstream Boat Lifts
                        516-468-DOCK
                        Long Island, NY

                        Comment


                        • #13
                          Thanks Steve. It is still amazing that so many people are willing to share so much.
                          Thanks
                          guys
                          John
                          UNISHIPPERS is the source to ship motors, skis, etc. Call I can probably set you in the right direction.
                          316-943-1468 fax 316-941-9719
                          e-mail [EMAIL="[email protected]"][email protected]
                          2015 FX-SVHO All stock and 71.1 on GPS love it.
                          2004 GTX wifes ski stock 4" air and RXP ecu
                          2005 GPR SOLD ported (west coast Porting, balanced (osiedbill), dplate, keyway, jims plate there is more dont' recall everything
                          West Coast Porting The place to make your machine be the best it can be
                          www.wcporting.com

                          Comment


                          • #14
                            Originally posted by 04gtxsc View Post
                            Thanks Steve. It is still amazing that so many people are willing to share so much.
                            Thanks
                            guys
                            John
                            now i just gotta convince you to SHARE your avalanche with me we'll switch vehicles every 6 months
                            EZ Dock of Long Island
                            Sunstream Boat Lifts
                            516-468-DOCK
                            Long Island, NY

                            Comment


                            • #15
                              See you at MBIII i will give you a ride around the parking lot. LOL
                              UNISHIPPERS is the source to ship motors, skis, etc. Call I can probably set you in the right direction.
                              316-943-1468 fax 316-941-9719
                              e-mail [EMAIL="[email protected]"][email protected]
                              2015 FX-SVHO All stock and 71.1 on GPS love it.
                              2004 GTX wifes ski stock 4" air and RXP ecu
                              2005 GPR SOLD ported (west coast Porting, balanced (osiedbill), dplate, keyway, jims plate there is more dont' recall everything
                              West Coast Porting The place to make your machine be the best it can be
                              www.wcporting.com

                              Comment

                              Working...
                              X