Above Forum Ads

Collapse

Announcement

Collapse
No announcement yet.

P-0505

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • P-0505

    So i put the ski in for the first time in a long time today to try out the new X-charger and i got the P-0505 code. I looked it up and it said this "DLA output stage cutoff memory circuit or output stage fault or open circuit or short to 12V". If it matters i did add a pig tail because i was having issues with it. And put in some 42's along with the X-charger. What does this mean haha?
    2004 RXP w/ 15/20R, RP holes filled, Riva 3in. X-charger w/ 42's, free-slow exhaust. 73.6 MPH w/Garmin

  • #2
    P-0505

    Possible cause:
    Damaged actuator, damaged circuit wires, damaged connector or damaged ECM output pins.
    Service action:
    Check for approximately 50 ohms between pins A and D and also between pins B and C of the idle bypass valve.
    Check for damaged circuit wires.
    Check for approximately 50 ohms between pins A-36 and A-35 and also between pins A-37 and A-38.
    Check for damaged connector, damaged ECM output pins or ECM failure.

    Check all electrical connections and make sure there are no bent or missing terminals, also what is the "pigtail" for?
    sigpic
    2008 RXT-X 80mph
    2009 RXP-X
    2016 RXP-X 82 mph
    2022 RXT-X

    Comment


    • #3
      The pig tail is for the knock sensor update which needed to be done to the 04's. Okay looks like i got some electrical checking to do. Thanks!
      2004 RXP w/ 15/20R, RP holes filled, Riva 3in. X-charger w/ 42's, free-slow exhaust. 73.6 MPH w/Garmin

      Comment


      • #4
        I was just reading your thread and wondered if you got the error code resolved? What is the pig tale for? I am about to install an x charger and 42# injectors in my 04 ski and wondered how your install went. I have the same setup as you with prop and intake. Did you notice a big improvement? Top speed?

        Comment

        Working...
        X