Tweet
If you tow much at night, you already know that back up lights on the trailer would be nice.
Now, you can add them with very little cost or work.
TecNiq lights has a really neat stop/turn light (model T70) that is a direct replacement for the standard 6 inch grommet mount light found on many trailers. It requires no cutting or external mounting on the trailer.
The fixture uses an integrated ground circuit so all you have to add is a single power wire with a .157 bullet or use a standard three way plug. You will have to replace the flat 4 lead with a 7 way or flat 5. Since most tow vehicles already come from the factory with a 7 way, its a great retrofit that only requires you to run one wire on the trailer.
The center positioned white LEDs are very bright and really help with visibility behind the trailer.
Now, you can add them with very little cost or work.
TecNiq lights has a really neat stop/turn light (model T70) that is a direct replacement for the standard 6 inch grommet mount light found on many trailers. It requires no cutting or external mounting on the trailer.
The fixture uses an integrated ground circuit so all you have to add is a single power wire with a .157 bullet or use a standard three way plug. You will have to replace the flat 4 lead with a 7 way or flat 5. Since most tow vehicles already come from the factory with a 7 way, its a great retrofit that only requires you to run one wire on the trailer.
The center positioned white LEDs are very bright and really help with visibility behind the trailer.
Comment