Correct bunk spacing for 2016 RXPX 300 and a 2016 GTR 215? 2016 Triton Elite trailer

[Mope0384]

Hey guys I have a brand new 2016 2 place triton elite trailer with a 2016 rxpx 300 and a 2016 GTR 215.

I'm looking for any measurements that anyone might have on proper alignment for the bunks for both skis.

Tongue weight is already set. Looking for width of the bunks and angles of the bunks.

Any help would be appreciated. Thanks

[K447]

Are the hulls on the trailer now?

If yes, you can probably calculate and measure how much the bunks need to shift inwards or outwards to match up nicely with the flats on the hull bottom, between the chine ridges.

Always keep each bunk bracket pair (front pair and rear pair) equidistant from the winch tower centerline. The hull must be aligned with the bow roller and not be angled left or right.

[moparguy]

Hey guys I have a brand new 2016 2 place triton elite trailer with a 2016 rxpx 300 and a 2016 GTR 215.

I'm looking for any measurements that anyone might have on proper alignment for the bunks for both skis.

Tongue weight is already set. Looking for width of the bunks and angles of the bunks.

Any help would be appreciated. Thanks

I can measure my trailer tonight, I have my RXPX 300 and wifes GTI130 SE on a side by side Karavan. I'll try to get the width of the bunks and angle for you tonight

[ValBugi]

I doubt you still need this, but hope this helps if you do.. with some minor adjustments these measurements worked well for me.