step by step walk through videos for maintenance and repairs

[Thor]

3 things:

1) “Thank YOU!” to everyone who is contributing videos (major appreciation)!

2) Anyone have a link to any “Capt.Reza”-level quality video(s) on step-by-step winterization? (Have a brand new VXR I am under short time window to protect from outdoors storage sub-freezing conditions

3) Don’t know if this is posted anywhere else or not but, AT TIME OF THIS POST, KellSports is offering FREE SHIPPING on individual purchase of just the $14.50 Extension Wand that fits onto cap of the aerosol cans of Fluid Film (scroll down to near bottom of page and see “Extension Wand fits Fluid Fim aerosol cans”

http://www.kellsportproducts.com/Spraygun.html

[roosty]

Bump this thread to the top! Thx so much to those have contributed!

[WP3223]

The videos and info are great, wish someone did a ribbon delete video on the VXR. Thanks.

Here is the next best thing -

http://www.greenhulk.net/showthread.php?t=178947&page=13&p=2091335&viewfull=1#post2091335

Just check out post #253 from Jarrett.

[BeardedSkier]

The videos and info are great, wish someone did a ribbon delete video on the VXR. Thanks.

[BigMac]

Ribbon Delete for SHO - http://www.youtube.com/watch?v=ZTDaK_P9TGM

Juste parfait! je vais pouvoir installer la version TBM Merci

[The Rooster]

Ribbon Delete for SHO -

http://www.youtube.com/watch?v=ZTDaK_P9TGM

Very nice video, thanks. So much easier on the N/A FX-HO / VXR.

[WP3223]

Ribbon Delete for SHO -

http://www.youtube.com/watch?v=ZTDaK_P9TGM

[griffin55]

So far the only video i would like to see is how to install the intake manifold upgrade

+1000000

[clydoudou]

So far the only video i would like to see is how to install the intake manifold upgrade.

hi all this thread is for the upload of videos for maintenance and repairs of your watercraft for example if you feel you want to video a step by step removal of the intake grate- sealing it up and replacing it then post the video here.
the point of the thread is
1 to give the inexperienced a chance to turn a spanner with real time help from a video
2 to show others what you are doing
and 3 how you are doing it and with what tools.

this will hopefully give good reference for all and also stop all the pointless reposts of people asking how to...

THE RULES.
please keep on topic!!!! this thread will be a good thread if you all keep on topic.
please only post up factual videos

WHEN SUBMITTING A THREAD PLEASE POST UP WHAT THE VIDEO IS ABOUT IN THE TITTLE BAR this will give people the tittle of your video without going into the post.

lets see how it goes.

[CaptainReza]

I truly appreciate those who appreciate the work, Thank you Sir!
What's left? Good question If you own a Yamaha FX HO, what I have shown should be all you need for 500 hours or so If I ever get there, I'd like to learn and show intermediate bearing and pump bearing replacement.

If I get into any kind of problem that would need something to come out, I will make sure to video it.

Cheers friend!

Captain, your contributions are VERY APPRECIATED... what's left to video?

[kwkyamaha]

Captain, your contributions are VERY APPRECIATED... what's left to video?

[c4t]

This makes it so much easier to get the oil done

[CaptainReza]

Thanks for the kind words! I'm happy if it makes anyone feel more comfortable!

This is the extractor I bought

http://www.amazon.com/Mityvac-7400-Liter-Fluid-Evacuator/dp/B000JFJM14/ref=sr_1_3?ie=UTF8&qid=1344627529&sr=8-3&keywords=oil+extractor

It's been working great for the last 2 years! Just make sure if you extract salt water from the hull with this pump, You will need to rinse it with fresh water or it will be wasted! It's not meant for salt water

Man great video! Thank you this makes me much more comfortable doing my oil change! Where did you buy the oil siphon /pump?

[r33pwrd]

i have an fzs and my steering wheel is pretty hard is there anyway i can lubricate the cables or do something to it so they get soften?

Always been this way or getting worse as it ages?

[dairon2180]

i have an fzs and my steering wheel is pretty hard is there anyway i can lubricate the cables or do something to it so they get soften?