Engine Warning Codes and Engine Type Codes

[Private]

48 code

I have been having a lot of problems with my one display on a 1300. It's not countin the hours, and the numbers are somewhat blurred, and can't really make it out. The warning goes off, and I can make out a 48.. Now I have tried everything from unplugging all the wires, to drying out the connections, to even running the ski without the display... Nothing seems to fix the problem... Has anyone ever run into the 48 code?

[agsbill]

when i hold the reset button nothing happens....is that good or bad???

Same here!! 2002 GP1200R

Bill

[wreckingball]

The code will usually go away after you pull the lanyard, unless there is a problem then it will come back.

Threr is no way to permanently clear all the history codes... they are stored in the ECU and can be re-called with the YDS

I don't want the code to go away! When I got home to check why my warning was sounding and my engine light flashing, all I got while testing was 01.
I'd rather know what was going on! Because my warning would come on every 5 min of riding. Once the gauges went blank, fired up and went another 5 min before the warning came on again.

How expensive is a YDS? And does anyone maybe have one for sale??? Or loan if I pay the shipping?

Joe

[yamaha101]

when i hold the reset button nothing happens....is that good or bad???

[WFO]

The code will usually go away after you pull the lanyard, unless there is a problem then it will come back.

Threr is no way to permanently clear all the history codes... they are stored in the ECU and can be re-called with the YDS

[spaceman]

remove the battery for 24hours

[hooksgp1300]

good to know

thanks for the info. is there any way to clear all these codes? paul

[RX951]

ttt

[spaceman]

This is very important info.
I printed this out, laminated it, and pasted in inside the glovebox (key compartment)

[WFO]

Sticky this please Mods

[ABBOTT]

.

[ABBOTT]

These 2 subjects have come up recently and i wanted to remind everybody what they were. These boards constantly have new members joining that may not know how to do searches from over a year ago.

This will help those to keep fresh (many of you already have this info). This is for the new people.

Warning Codes From The Dash Display Of The GPR: To get this reading, hold the display button down for about 8-10 seconds and the boat will do a self test on a number of things.

01-Normal
13-Pickup Coil Malfunction
15-Engine Temperature Sensor Malfunction
18-Throttle Position Sensor Malfunction
19-Incorrect Battery Voltage
22-Atmospheric Pressur Sensor Malfunction
23-Intake Air Temperature Sensor Malfunction
47-Slant Detection Switch Malfunction
48-Incorrect Data Transmission
53-Exhaust Temperature Malfunction
54-Stepping Motor Malfunction
55-Steering Switch Malfunction
59-Memory Data Malfunction
64-YPVS servomotor Malfunction
65-Cooling Waer Temperature Sensor Malfunction
66-Stepping Motor Stuck Closed
67-Stepping Motor Stuck Open

Yamaha Actual Engine Codes (Type Of Engine) From Previous Years As Well As Current Models. All Of These Are 2 Stroke Codes Only.

6M6 >>>650LX, VXR650, WRIII650, SJ650
61X >>>ProVXR 701, WRIII701, SJ700 (`94~95), WaveBlaster1 (`93~95), Raider 701 (`96~97)
62T >>>SJ700 (`96+), WaveBlaster (`96+), Raider Deluxe, XL700, Venture 700
64X >>>GP760, WaveBlaster2, Raider 760, Venture 760, XL760
63M >>>Raider 1100, Venture 1100
65U >>>GP1200, XL1200, SUV1200
66E >>>GP800, GP800R, XL800, XLT800
66V >>>GP1200R, XL1200Ltd, XLT1200
60T >>>GP1300R (2003-2007)