Yamaha FX and FZ SVHO mods and speeds thread

[outnumbered]

I think it was more like a 13/17. I have made some changes and updated post #185

[MattG178]

surprised the f1 on 13/18 single is pushing you 9600 rpm's? What should the gen 2 20lb sc wheel push a 13/18 on fzr with 86mm 3deg lucky 13 cone ( no washers) well time will tell i guess haha.

[jwaked]

For sure Jim’s plate and fizzle

[B-LINE-MOTO]

Year 2016
Model: fxsvho
Speed@ RPM: 80mph /8400rpm
Weight 190
Air Temp: 90
Altitude: sea level
Fuel Level: 1/2

Fuel Octane:93

Mods: deans tune
Solas 13/18 pitched by Deans team
Worx intake
Worx bov
Leos wedge
Ribbon delete
Worx strainer
Tj exhaust mod
Worx cooling anode
direct ic line

What's next??

[outnumbered]

Awesome!! It seems like 90 MPH is right around the corner

I'm certain that if I put the F2 wheel on, I could see an increase, but I think I like where I'm at. If increased mph comes through tweaking here and there with my current set up, then great. But I don't think I want to put anymore strain on the motor. She's treating me pretty good right now.

[JFizzleJR]

Thanks! Your intercooler has been a significant contributor to that number.

Awesome!! It seems like 90 MPH is right around the corner

[outnumbered]

Wow!! That's hauling ass for an FX. Killer job on your ski!

Thanks! Your intercooler has been a significant contributor to that number.

[JFizzleJR]

Wow!! That's hauling ass for an FX. Killer job on your ski!

Year 2017
Model: fx svho
Speed @ RPM: 88.2 mph /9600 rpm
Weight 200lbs.
Air Temp: 59
Altitude: 309
Fuel Level: 4 bars

Fuel Octane:93

Mods:
Maptuner Stage 3 Tune
F1 wheel making 21/22 pounds
Valve Retainers
100lb Injectors
Riva Billet Intake Manifold mount
Riva Exhaust with Riva O2 Sensor Mounting Kit
Riva Cold Air Intake with Greenhulk cold air modification to the front compartment
R&D Supercharger shaft
Pinned Supercharger housing
Solas 13/18
Jim's modified ride plate
Riva cooling line
AEM Boost and AFR gauge
Fizzle intercooler with Tial BOV
Water line strainer
Riva catch can
Dean's 2 degree pump wedge
PET 2100 Tach
Candoo GPS Module

[outnumbered]

Year 2017
Model: fx svho
Speed @ RPM: 89.5 mph /9080 rpm
Weight 200lbs.
Air Temp: 75
Altitude: 309
Fuel Level: 4 bars

Fuel Octane:93

Mods:
Maptuner Stage 3 9500 Tune
F1 wheel making 21/22 pounds
Valve Retainers
100lb Injectors
Riva Billet Intake Manifold mount
Riva Exhaust with Riva O2 Sensor Mounting Kit
Riva Cold Air Intake with Greenhulk cold air modification to the front compartment
R&D Supercharger shaft
Pinned Supercharger housing
Solas 13/19
Jim’s modified ride plate
Riva cooling line
AEM Boost and AFR gauge
Fizzle intercooler with Tial BOV
Ribbon delete
Riva catch can
Dean’s 2 degree pump wedge
PET 2100 Tach
Candoo GPS Module
Riva Fuel pressure regulator

[netosvho]

Hi guys, fzs 16 stage 1 riva parts, stock intake grate, r&d ride plate, 13/18 solas with maptunerx bone stock Brazil 8100 tune ... 74.5mph garmin, max rpm 7830 in tto tach. I think should change the washers on the rd plate ... any suggestions?

[netosvho]

Add solas 13/20 = 69,5mph at 7320

[netosvho]

Hi guys fzs 2016, scom, custom filter and exhaust, r&d ribbon delete, r&d ride plate, tial bov... stock prop 73,4mph at 7540 rpm

[5ecu179]

Wow that's �� fast

[stifun]

09 fzr
91.9@9160rpm
Sea level
E85 (100 octane)
Et18 high boost (sho)
Twin prop

That is moving! I can only imagine 90+mph on a ski would be pretty insane.

[FZeeR]

09 fzr
91.9@9160rpm
Sea level
E85 (100 octane)
Et18 high boost (sho)
Twin prop

Great mph