Tweet
SHO/FZR/HO/VXR 1800cc Speeds and Mod's Database
Hey guys, this is the Yammi 1800cc FZR/SHO/FXHO/VXR speeds and mod's database. We've all been talking about it for awhile so here's our chance to SHOw what the Yammi 1800cc engine platform can do in different hulls and states of tune! Engineermike established a very comprehensive and easy to read format in the SD section so I see no reason to reinvent the wheel.
The list is in order from fastest to slowest so that people could easily see what it takes to go how fast and with what mods. It will also make it easy to answer questions like, "how fast can you go on the stock ECU/injectors?", "how fast can you go with the stock prop?" etc. . .
Format should be (AND PLEASE STICK WITH THE FORMAT!):
GPS speed @ rpm, Screen name, year/model, Stage X.X+/-, rider weight, L temp, E temp, Altitude, bars of fuel, trim setting, air intake (inc throttle mod), supercharger (boost), intercooler, prop, exhaust mod's, nozzle size, hull mod's (grate, rideplate, sponsons, etc.), injection mod's (ECM, injectors, fueltuner, etc.), engine mod's, free mod's (rideplate holes filled, deck ventilation, etc).
96.8mph @ 8700RPM (still on limiter), SHOdude, 2001 GPR/SHO, 220 pounds, ?ยข tank fuel, Riva E1 SC wheel, R & D R2 reflash, RRFPR, R & D powershot, custom intercooler, custom air intake, GPR injectors, dynafly prop, custom waterbox, sanded hull, 1200 grate, R & D ride plate with Jim’s FF cut, 155mm pump set up YouTube - ZornRacing GPRSHO conversion 96.8mph run
96.0MPH @ 8540, ksalles, 09/GPSHO, 215lb rider weight, 55 degree temp, 4 bars of fuel, one click from all the way up trim setting, home made 4" air intake, ET15.5 wheel, custom intercooler setup, dynafly 14/24, custom gutted and shortened 1200 waterbox, stock sho venturi and steering nozzle, hull mod's (SS 800 grate, Jim's FF rideplate, machined Riva trim tabs, stock sponsons), Ben Herman prepped hull, V-TECH Stage III Tune, stock engine, manifold upgrade sleeve, Tial 50mm BOV, additional ventilationports in front of hull and rear of seat
[email protected] 8300 rpm, Jim's Performance GPR-SHO, 200+lb, Air 70, water 63, 3/4 full tank, elevation-sea level, Fresh water. R&D R2 ECU reflash (fastest w/ reflashed stock ECU), Riva E1 wheel, r&d plate with jims mod.noozle is stock 83mm.riva grate.f boost intercooler.f boost bov.riva air filter.intake manifold upgrade.foam inserts removed.
91.1 MPH @ 8800 RPM On The Limiter Rick xp, 09 FZR, Bone Stock Motor, Custom 22psi Supercharger, Motec, 1000cc Injectors, 3/4 Tank of Fuel, Trim N, Riva Air Intake, Riva Manifold Kit, Watson Intercooler kit, Riva Free Flow Exhaust, Bored and Blueprinted Transom, Watson Cooling kit, 84mm Venturi, 91mm Steering, 160mm 15/23 Prop, 160mm Wear Ring, Cam Gears, Riva Driveshaft Sleeve, R&D Rideplate, R&D Intake Grate, TBM Sponsons.
89.6 MPH @ 8900rpm Richiefzr, 09 FZR , MoTeC , 1000cc injectors , 1/2 tank of fuel , Trim N , Riva Power filter , Riva Manifold kit , Custom supercharger 22psi , Custom rear mounted cooler , Turbosmart BOV, Skat 13/25 (155mm) , Riva Thru Hull , Riva Waterbox , Full built motor Stock COMP , Full ported head IN/EX , Over sized valves , STD cams , STD cam gears , STD nozzle , R&D Intake gate , R&D ADJ Ride plate , STD sponsons
89.3mph @ 8727rpm, GaryW, 09FZR, Stage ????, 200lb, L temp, E temp 88.9c, Altitude +20feet, 1/2 tank, nuetral, air intake Riva modified, supercharger ET 15.5psi, intercooler Watsons Special, prop 14/27, exhaust mod's Riva, nozzle size???, Riva grate, ???rideplate, injection mod's 1000cc, M400 Motec.engine mod's 5 angle valve port, Rods and JE pistons, free mod's rideplate holes filled, deck ventilation.
89.1mph @ 7750 rpms, smbstyle, GPR-SHO, 220lbs, 68deg air, 74deg water, half tank, neutral trim, filter element only, riva manifold upgrade, engine-tech SS low-boost wheel, ebay IC, custom pitched Skat by Duke, ff exhaust, stock sho nozzle, Riva 1200 grate, Jim's R&D Rideplate, Stock sponsons - stepped, fastest with stock ECU and Injectors, R&D powershot, custom RRFPR by Duke.
85.8 mph @ 8580rpm, MPower, 09 FZR @ 17.3 pounds of boost, 73 water, 62 air, 200 ft elevation, 1 bar fuel, trim N, E1 wheel, R2 reflash, riva cooler, riva RRFPR, riva cooling kit, riva air, riva manifold upgrade, riva exhaust, powershot, r&d grate/plate, 160mm liner/prop, riva shaft, r&d cone
85.3 @ 8650rpm, RUSH, 2009 FZR, Stage 2.5, 170lbs, 42deg, sea level, 1 bar fuel, trim setting one click up, custom air intake with through hull, c3 sc wheel ,motec,rrfpr, custom intake manifold and throttle body mod. Exhaust manifold mod, r&d intercooler & cooling kit, 13/25 +1 , custom exhaust/gutted waterbox, modded nozzle, trued/ blueprinted hull, intake, pump tunnel. R&D intake grate, rideplate and anti cav cone.
84.6mph @ 8800rpm, Gunna, 08SHO, 190lbs, Air 66, Water 66, Sea level, full tank, neutral trim, Riva air intake, ET prototype supercharger (22psi), Watson intercooler, 14 vien Skat 14/24 162mm, Stock exhaust, stock nozzle, Riva intake grate, strenghten pump tunnel, 1000cc injectors, Motec M400, JE pistons, Carrello rods, pump area voids totally filled, foam inserts gone. Fastest sho on the list (so far may2011).
83.1 [email protected],300 RPM, abracadabra, 09 FZR, 17 PSI BOOST, 3/4 fuel tank, 80 degree weather, 180lb rider, Ram air system, rear exhaust, full RIVA STAGE III.
82.9 @ 8440 rpm's, 09 FZr, Gmoeller- Air 72, water 63, 1/4 tank, elevation-sea level, Fresh water, trimmed 2-clicks up, C3-ll, powershot, R2 reflash, repitched 13/25 to 13/24 skat prop, riva air intake, riva exhaust, R&D intake grate, intake manifold upgrade, R&D rideplate, R&D sponsons, 12 lbs boost, Riva 83mm nozzle, Riva Power cooler, Riva intercooler kit, foam inserts removed
[email protected]??, cuchun, '06 GPR-SHO, 189 lbs, 82 air/77 water, full tank, trim 1up, FF intake, Riva Manifold upgrade, FF Exhaust, C1-11 Monster wheel, stock IC, ECU, and injectors, 800 grate, Skat-Trak 13/25, Riva Ride Plate
[email protected] 8,700 rpm, SHOBiz, '08 FXSHO, Stage 2 +, 260lbs, 74 air/water temp, 600ft, 1/2 tank, neutral trim, Riva Power Filter Pipe w/NO filter, R&D E1 SC wheel (w/BOV), Riva PowerCooler Intercooler, 13/25 Skat prop, Riva FF exhaust, Riva grate (sealed) & Jims R&D rideplate (Ground, Sanded, and ab out .100 inch shim), MoTec ECU & STOCK injectors, RD FPR, deck ventilation, Insulated exhaust & Intake.
[email protected] 8180 rpm, Leo, 09 FXSHO, 180 lbs, Air 70, water 63, 3/4 full tank, elevation-sea level, Fresh water,B1 wheel and power shot. i have my stock plate with jims mod.noozle is stock 83mm.riva grate.riva intercooler.riva bov.riva air filter.intake manifold upgrade.foam inserts removed, R2 reflash from R&D, AFR 11.9 to 12.3
impeller still the same
82.3 @ 8600rpm, RUSH, 2009 FZR, 170lbs, 58deg, sea level, 2 bar fuel, trim setting up, custom air intake with through hull, c3 sc wheel ,R&D R2 program w/ powershot, rrfpr, custom intake manifold and throttle body porting.HKS bov, Exhaust manifold porting, riva power cooler & cooling kit, 13/24 , custom exhaust/gutted waterbox, modded nozzle, trued/ blueprinted hull, intake, pump tunnel. R&D intake grate, vx rideplate and anti cav cone. fastest w/ stock (reprogrammed) ecu
__________________
[email protected], R3_killa, '08 FX-SHO, Stage 1+, 250lbs, 75 air/68 water, Salt Water, 3/4 tank, neutral trim, Riva Power Filter, Riva Manifold upgrade, Custom I/C Kit, HKS BOV, C5-11, Motec M400, I/C Cooling Kit, Custom Straight Pipe Exhaust, Skat-Trak 13/24, Anti-cavitation Cone, 93mm Steering Nozzle, R&D Intake Grate, Jim's Mod R&D Ride Plate, Pump Seal Kit.
[email protected] FZR AD, 10 FZR , Stage II+, 158lb, Air 95F, 1/2 tank, Trim N, Power filter, Manifold Upgrade, E1, Power Cooler, HKS BOV, R&D Engine/IC Cooling, Skat 13/24, Riva Exhaust, stock nozzle, R&D Intake gate & plate, R&D R3, RRFPR (50lb), Stock Engine, Deck Ventilated.
AFR's still lean
[email protected] rpm, tobbesweden, SHO cruiser 08, C3 kompressor, R2 programing, Powershot, skat 13/25, Jimsplate, custom nozzle, Philips gpr stering nozzle, my own free air intake, Riva truh hull exhaust, type 13 intercooler, hks bov, anti k cone
80.1 @ 8850 rpm on the limiter, MoTeC Pete, Fx SHO, 209 lbs, 60, 62, 20ft ?, 2 bars fuel, Neutral, Riva Aircleaner, flame arestor gone, 14lbs boost, Vortec intercooler , C5 SC wheel, 13/25, free flow exhaust, std grill and jet unit apart from the 13/25, R&D ride plate all washers still fitted, MoTeC M400 ECU, R&D FP Regulator, std engine, hull std.
[email protected] 8100 rpm, Rip'nTear SHO, '08 FXSHO, Stage 3, 170lbs, 78 air/water temp, sea level, half tank, neutral trim, Riva Power Filter w/ Throttle Mod, Riva E1 SC wheel, Riva Powercooler, ?? prop, Riva rear-exit exhaust, stock waterbox, Riva grate & R&D rideplate, VIPEC ECU running detuned break-in MAP for new motor, Riva RRFPR, Stock injectors, deck ventilation.
78.5 @ 8400 RPMs XLT Chad, '09 FZS, 208lbs, air 61* water 48* 2180 ft., trim 1 up, 1 bar of fuel, YoYamma's cheap air upgrade, ET low boost wheel, stock I/C, 15/22 OEM prop, Tommy Jordon's exhaust mod, stock nozzle, Jim's modded VX plate, R3 reflash, HKS BOV, Riva manfold upgrade, air intake mod., PET tach.
[email protected]+rpm,Tysonfzr,09 FZR stage 2+,151 pound,fresh water,full tank,1 click up,Riva intake,B1 10.5lbs,Riva powercooler,13/22r,Riva exhaust,83mm,R&D grate and rideplate,foam insert removed,R2 reflash,Riva Engine upgrade kit with Racing Cams...
75.7 @ 8080 rpms, High Velocity, 09 FZS, over 100hrs on the clock!, 205lb rider, 76 air/65 water (brackish), sea level, 1/4 tank, trim up, Pet 2100DX tach, Riva: manifold upgrade, Air intake, FF exhaust, R&D: Intake grate, PPK, Ride plate, R2 re-flash, WFO Pitch Dynafly 15/22ish
stock: S/C, I/C, injectors, fuel pump, turn and exit nozzles
75.5mph @ 7950rpm, Doug78, 2009 FZR, Stage 2ish, 147lbs, 10 celsius (50), Sea level, 2 bars of fuel, neutral trim, Riva air intake and manifold upgrad, RD c3-11 (10psi), frozen boost type 9 and HKS bov, 160mm 13/23, Riva thru hull, RD intake grate and ride plate (1 shim in back, spacers still in), RD r2 ecu plus powershot
74.9mph @ 7600rpm (tiny tach) MikeFZR, 2009 FZR, Stage 1, 160lbs, 80*,65*, 400feet, trim 1 up, half a tank, powerfilter, stock SC, stock IC, manifold upgrade, FF exhaust, BOV, R&D grate, Jim's modified VX rideplate, Skat 13/23, stock ECU.
74.8 @ 7700 rpms, gmoeller, 09 FZR, 245 lbs, air 65, water 65, sea level, ocean, 3/4 tank, trim -2 up (rd-vts cam), 10 lbs boost, Riva air intake, intake man. upgrade, Riva FF exhaust, Riva Power cooler, Riva HKS BOV, Skat 13/25 prop (true), 81mm ring, R&D intake grate, VX rideplate, Riva sponsons, Powershot, C3-11 SC wheel, Riva SC shaft upgrade, R&D cooling kit, foam inserts removed
__________________
73.6mph @7600rpm, tysonfzr, 09'Fzr 1/3 tank....1 click up, Riva manifold upgrade kit-Riva power filter kit-Riva FF exhaust kit-Riva pro reduction nozzle 83mm-Riva rear xhaust kit-Riva power intercooler-Riva b1-Riva blow off valve-Riva engine breather kit-Riva SC heavy duty shaft-Riva fuel pressure regulator-Riva engine cooling kit-R&D intake grate-R&D pump seal kit-R&D ride plate-R&D powershot-Skat-Trak13/25
[email protected]rpm - R3_killa, '09 FZS, 250lbs, 82air/77water, salt water, 3/4 tank, nuetral trim, Riva Power Filter, Riva Manifold Upgrade, Riva FF Exhaust, R&D R4 Intercooler Kit, HKS BOV, R&D C3-11, R&D Intercooler Cooling Kit, R&D VTS Cam Kit, R&D Steering Nozzle, Skat-Trak 13/24, R&D Anti-cavitation Cone and R&D Sponsons. Stock E.C.U. and STD Fuel System.
__________________
72.3 @7750rpms, Caymansho, 09' FX SHO, Stage 1+, 170lbs, 80air/70water (salt), sea level, 3/4tank, Neutral trim, Riva Power Filter, Riva Manifold upgrade, R&D C1-SC wheel, R4 Intercooler, HKS-BOV, 13-23 Skat prop, Anti-cavitation cone, Waterbox mods (bored, not gutted), Riva FF Exhaust, Riva Intake Grate (pump seal kit), R&D Ride Plate (stock), R&D Sponsons, R&D Nozzle, stock ECU/Injectors.
[email protected] 7750 rpm, SHOdude, 67 air/70water temp, 220 lbs., neutral trim, 1/4 tank, Riva power filter & intake mod, Jim's R&D ride plate, Riva intake grate, fastest with stock 12/19 Prop, Riva sponsons
72.0 @ 7750 rpm, Superair, 08 FXSHO black, 195lbs, 67 air/ 60 water, 500ft, 3/4 tank, 3/4 trim, custom intake, Riva intake upgrade, XS intercooler, BOV, custom exhaust bypass, Riva Grate, Jim's ride plate with two shims front and rear, stock prop re-pitched to 13/23, boost gauge @ 6.5 psi, custom multiport vacuum adapter, stock ecu & injectors, hull ventilation.
[email protected]?? rpm, tobbesweden, 08 FX SHO Cruiser, lake temp 12C
Riva: intakeGrate, Power Filter.....R&D, BOV, Manifold Upgrade/CFM Kit, IC Cooling Kit, Pump Cone, Sponsons, Powershot, Skat 12/22, modded R&D plate
71.3 @ 7520 (tiny tach), mikeFZR, 2009 FZR, Stage 1, 150lbs, 75F, 75F, 400ft, half a tank, trim all the way up, riva air intake, skat 13/23 (true), riva ff exhaust, riva manifold upgrade, r&d grate+ppk.
[email protected] rpm, Onebadsho, 08 fxsho, 260lbs, air 70 water perfectly flat, neutral trim, 1/4 tank gas, sea level, mods = riva ff exhaust r/d intake (drop in), Riva manifold kit and rips air mod, riva pump seal kit and intake grate , 13/24 prop,
future -mods supercharger wheel and riva ecu hopefully be at 78 mph and 12lbs of boost
70.4mph GPS @ 7400 Wakeboardmuppet, 200lbs 2008 SHO 54air/46 water, saltwater, 3/4 tank, trim up 1, Riva power filter, Riva manifold upgrade, HKS BOV C3-11, gutted waterbox, FF Exhaust, 13/25 prop Lots more speed Coming!!!
[email protected]???? rpm. gSoto, FX SHO Blue 2008, 230 lbs, 82 air temp, sea level, 1/2 tank, neutral trim, Riva Power Filter, Modded FF exhaust, Riva ribbon, Jim's SHO rideplate modified, Riva Intake Grate, Stock ECU, Stock IC, Stock SC.
69.7& ??rpm, downstream, Camaudio, '09 FZS Black, Stock 7hrs, 190lbs, 70 air/50 water temp, 600' elevation, Full tank, neutral trim
69.0 MPH @7550 RPMs, Xrunner, 2009 FX SHO, Bone stock, 16.5 hrs, 180lb. rider, 59 degree air/48 degree H2o, Almost sea level, 1/8th tank, One click bow up trim, Fresh water that was glass
68.6 @ 7,xxx rpm, Mazy, '09 FZR, Stock, 160lbs, 80 air, 70water temp, 500ft, 1/4 tank, trim up 1, plate holes filled.
[email protected] ??rpm, Mikevv, '08 FXSHO Blue, Stock 50hrs, 175lbs, 80 air/water temp, sea level, 1/4 tank, neutral trim
67.8 MPH @7550 RPMs, Xrunner, 2009 FX SHO, Bone stock, 9.5 hrs, 180lbs. rider, 48 degree air/46 degree H2o, Almost sea level, Full tank, Neutral trim, Fresh water that was glass
67.8 @ 7500 rpm, Treeman, 09 FZR, 1click up full tank of 87
fresh water light chop no mods
67.7 @ ?rpm db2540, 09 FZS, shock, 70kg, 20'c air/water, sea level, 3/4 tank, trim up 1, saltwater.
FZS- STOCK
[email protected] 7550 rpm, doug78, 2009 FZR, bone stock, 149 lbs, 13 Celius, quarter tank, neutral trim, Saltwater
__________________
Hey guys, this is the Yammi 1800cc FZR/SHO/FXHO/VXR speeds and mod's database. We've all been talking about it for awhile so here's our chance to SHOw what the Yammi 1800cc engine platform can do in different hulls and states of tune! Engineermike established a very comprehensive and easy to read format in the SD section so I see no reason to reinvent the wheel.
The list is in order from fastest to slowest so that people could easily see what it takes to go how fast and with what mods. It will also make it easy to answer questions like, "how fast can you go on the stock ECU/injectors?", "how fast can you go with the stock prop?" etc. . .
Format should be (AND PLEASE STICK WITH THE FORMAT!):
GPS speed @ rpm, Screen name, year/model, Stage X.X+/-, rider weight, L temp, E temp, Altitude, bars of fuel, trim setting, air intake (inc throttle mod), supercharger (boost), intercooler, prop, exhaust mod's, nozzle size, hull mod's (grate, rideplate, sponsons, etc.), injection mod's (ECM, injectors, fueltuner, etc.), engine mod's, free mod's (rideplate holes filled, deck ventilation, etc).
96.8mph @ 8700RPM (still on limiter), SHOdude, 2001 GPR/SHO, 220 pounds, ?ยข tank fuel, Riva E1 SC wheel, R & D R2 reflash, RRFPR, R & D powershot, custom intercooler, custom air intake, GPR injectors, dynafly prop, custom waterbox, sanded hull, 1200 grate, R & D ride plate with Jim’s FF cut, 155mm pump set up YouTube - ZornRacing GPRSHO conversion 96.8mph run
96.0MPH @ 8540, ksalles, 09/GPSHO, 215lb rider weight, 55 degree temp, 4 bars of fuel, one click from all the way up trim setting, home made 4" air intake, ET15.5 wheel, custom intercooler setup, dynafly 14/24, custom gutted and shortened 1200 waterbox, stock sho venturi and steering nozzle, hull mod's (SS 800 grate, Jim's FF rideplate, machined Riva trim tabs, stock sponsons), Ben Herman prepped hull, V-TECH Stage III Tune, stock engine, manifold upgrade sleeve, Tial 50mm BOV, additional ventilationports in front of hull and rear of seat
[email protected] 8300 rpm, Jim's Performance GPR-SHO, 200+lb, Air 70, water 63, 3/4 full tank, elevation-sea level, Fresh water. R&D R2 ECU reflash (fastest w/ reflashed stock ECU), Riva E1 wheel, r&d plate with jims mod.noozle is stock 83mm.riva grate.f boost intercooler.f boost bov.riva air filter.intake manifold upgrade.foam inserts removed.
91.1 MPH @ 8800 RPM On The Limiter Rick xp, 09 FZR, Bone Stock Motor, Custom 22psi Supercharger, Motec, 1000cc Injectors, 3/4 Tank of Fuel, Trim N, Riva Air Intake, Riva Manifold Kit, Watson Intercooler kit, Riva Free Flow Exhaust, Bored and Blueprinted Transom, Watson Cooling kit, 84mm Venturi, 91mm Steering, 160mm 15/23 Prop, 160mm Wear Ring, Cam Gears, Riva Driveshaft Sleeve, R&D Rideplate, R&D Intake Grate, TBM Sponsons.
89.6 MPH @ 8900rpm Richiefzr, 09 FZR , MoTeC , 1000cc injectors , 1/2 tank of fuel , Trim N , Riva Power filter , Riva Manifold kit , Custom supercharger 22psi , Custom rear mounted cooler , Turbosmart BOV, Skat 13/25 (155mm) , Riva Thru Hull , Riva Waterbox , Full built motor Stock COMP , Full ported head IN/EX , Over sized valves , STD cams , STD cam gears , STD nozzle , R&D Intake gate , R&D ADJ Ride plate , STD sponsons
89.3mph @ 8727rpm, GaryW, 09FZR, Stage ????, 200lb, L temp, E temp 88.9c, Altitude +20feet, 1/2 tank, nuetral, air intake Riva modified, supercharger ET 15.5psi, intercooler Watsons Special, prop 14/27, exhaust mod's Riva, nozzle size???, Riva grate, ???rideplate, injection mod's 1000cc, M400 Motec.engine mod's 5 angle valve port, Rods and JE pistons, free mod's rideplate holes filled, deck ventilation.
89.1mph @ 7750 rpms, smbstyle, GPR-SHO, 220lbs, 68deg air, 74deg water, half tank, neutral trim, filter element only, riva manifold upgrade, engine-tech SS low-boost wheel, ebay IC, custom pitched Skat by Duke, ff exhaust, stock sho nozzle, Riva 1200 grate, Jim's R&D Rideplate, Stock sponsons - stepped, fastest with stock ECU and Injectors, R&D powershot, custom RRFPR by Duke.
85.8 mph @ 8580rpm, MPower, 09 FZR @ 17.3 pounds of boost, 73 water, 62 air, 200 ft elevation, 1 bar fuel, trim N, E1 wheel, R2 reflash, riva cooler, riva RRFPR, riva cooling kit, riva air, riva manifold upgrade, riva exhaust, powershot, r&d grate/plate, 160mm liner/prop, riva shaft, r&d cone
85.3 @ 8650rpm, RUSH, 2009 FZR, Stage 2.5, 170lbs, 42deg, sea level, 1 bar fuel, trim setting one click up, custom air intake with through hull, c3 sc wheel ,motec,rrfpr, custom intake manifold and throttle body mod. Exhaust manifold mod, r&d intercooler & cooling kit, 13/25 +1 , custom exhaust/gutted waterbox, modded nozzle, trued/ blueprinted hull, intake, pump tunnel. R&D intake grate, rideplate and anti cav cone.
84.6mph @ 8800rpm, Gunna, 08SHO, 190lbs, Air 66, Water 66, Sea level, full tank, neutral trim, Riva air intake, ET prototype supercharger (22psi), Watson intercooler, 14 vien Skat 14/24 162mm, Stock exhaust, stock nozzle, Riva intake grate, strenghten pump tunnel, 1000cc injectors, Motec M400, JE pistons, Carrello rods, pump area voids totally filled, foam inserts gone. Fastest sho on the list (so far may2011).
83.1 [email protected],300 RPM, abracadabra, 09 FZR, 17 PSI BOOST, 3/4 fuel tank, 80 degree weather, 180lb rider, Ram air system, rear exhaust, full RIVA STAGE III.
82.9 @ 8440 rpm's, 09 FZr, Gmoeller- Air 72, water 63, 1/4 tank, elevation-sea level, Fresh water, trimmed 2-clicks up, C3-ll, powershot, R2 reflash, repitched 13/25 to 13/24 skat prop, riva air intake, riva exhaust, R&D intake grate, intake manifold upgrade, R&D rideplate, R&D sponsons, 12 lbs boost, Riva 83mm nozzle, Riva Power cooler, Riva intercooler kit, foam inserts removed
[email protected]??, cuchun, '06 GPR-SHO, 189 lbs, 82 air/77 water, full tank, trim 1up, FF intake, Riva Manifold upgrade, FF Exhaust, C1-11 Monster wheel, stock IC, ECU, and injectors, 800 grate, Skat-Trak 13/25, Riva Ride Plate
[email protected] 8,700 rpm, SHOBiz, '08 FXSHO, Stage 2 +, 260lbs, 74 air/water temp, 600ft, 1/2 tank, neutral trim, Riva Power Filter Pipe w/NO filter, R&D E1 SC wheel (w/BOV), Riva PowerCooler Intercooler, 13/25 Skat prop, Riva FF exhaust, Riva grate (sealed) & Jims R&D rideplate (Ground, Sanded, and ab out .100 inch shim), MoTec ECU & STOCK injectors, RD FPR, deck ventilation, Insulated exhaust & Intake.
[email protected] 8180 rpm, Leo, 09 FXSHO, 180 lbs, Air 70, water 63, 3/4 full tank, elevation-sea level, Fresh water,B1 wheel and power shot. i have my stock plate with jims mod.noozle is stock 83mm.riva grate.riva intercooler.riva bov.riva air filter.intake manifold upgrade.foam inserts removed, R2 reflash from R&D, AFR 11.9 to 12.3
impeller still the same
82.3 @ 8600rpm, RUSH, 2009 FZR, 170lbs, 58deg, sea level, 2 bar fuel, trim setting up, custom air intake with through hull, c3 sc wheel ,R&D R2 program w/ powershot, rrfpr, custom intake manifold and throttle body porting.HKS bov, Exhaust manifold porting, riva power cooler & cooling kit, 13/24 , custom exhaust/gutted waterbox, modded nozzle, trued/ blueprinted hull, intake, pump tunnel. R&D intake grate, vx rideplate and anti cav cone. fastest w/ stock (reprogrammed) ecu
__________________
[email protected], R3_killa, '08 FX-SHO, Stage 1+, 250lbs, 75 air/68 water, Salt Water, 3/4 tank, neutral trim, Riva Power Filter, Riva Manifold upgrade, Custom I/C Kit, HKS BOV, C5-11, Motec M400, I/C Cooling Kit, Custom Straight Pipe Exhaust, Skat-Trak 13/24, Anti-cavitation Cone, 93mm Steering Nozzle, R&D Intake Grate, Jim's Mod R&D Ride Plate, Pump Seal Kit.
[email protected] FZR AD, 10 FZR , Stage II+, 158lb, Air 95F, 1/2 tank, Trim N, Power filter, Manifold Upgrade, E1, Power Cooler, HKS BOV, R&D Engine/IC Cooling, Skat 13/24, Riva Exhaust, stock nozzle, R&D Intake gate & plate, R&D R3, RRFPR (50lb), Stock Engine, Deck Ventilated.
AFR's still lean
[email protected] rpm, tobbesweden, SHO cruiser 08, C3 kompressor, R2 programing, Powershot, skat 13/25, Jimsplate, custom nozzle, Philips gpr stering nozzle, my own free air intake, Riva truh hull exhaust, type 13 intercooler, hks bov, anti k cone
80.1 @ 8850 rpm on the limiter, MoTeC Pete, Fx SHO, 209 lbs, 60, 62, 20ft ?, 2 bars fuel, Neutral, Riva Aircleaner, flame arestor gone, 14lbs boost, Vortec intercooler , C5 SC wheel, 13/25, free flow exhaust, std grill and jet unit apart from the 13/25, R&D ride plate all washers still fitted, MoTeC M400 ECU, R&D FP Regulator, std engine, hull std.
[email protected] 8100 rpm, Rip'nTear SHO, '08 FXSHO, Stage 3, 170lbs, 78 air/water temp, sea level, half tank, neutral trim, Riva Power Filter w/ Throttle Mod, Riva E1 SC wheel, Riva Powercooler, ?? prop, Riva rear-exit exhaust, stock waterbox, Riva grate & R&D rideplate, VIPEC ECU running detuned break-in MAP for new motor, Riva RRFPR, Stock injectors, deck ventilation.
78.5 @ 8400 RPMs XLT Chad, '09 FZS, 208lbs, air 61* water 48* 2180 ft., trim 1 up, 1 bar of fuel, YoYamma's cheap air upgrade, ET low boost wheel, stock I/C, 15/22 OEM prop, Tommy Jordon's exhaust mod, stock nozzle, Jim's modded VX plate, R3 reflash, HKS BOV, Riva manfold upgrade, air intake mod., PET tach.
[email protected]+rpm,Tysonfzr,09 FZR stage 2+,151 pound,fresh water,full tank,1 click up,Riva intake,B1 10.5lbs,Riva powercooler,13/22r,Riva exhaust,83mm,R&D grate and rideplate,foam insert removed,R2 reflash,Riva Engine upgrade kit with Racing Cams...
75.7 @ 8080 rpms, High Velocity, 09 FZS, over 100hrs on the clock!, 205lb rider, 76 air/65 water (brackish), sea level, 1/4 tank, trim up, Pet 2100DX tach, Riva: manifold upgrade, Air intake, FF exhaust, R&D: Intake grate, PPK, Ride plate, R2 re-flash, WFO Pitch Dynafly 15/22ish
stock: S/C, I/C, injectors, fuel pump, turn and exit nozzles
75.5mph @ 7950rpm, Doug78, 2009 FZR, Stage 2ish, 147lbs, 10 celsius (50), Sea level, 2 bars of fuel, neutral trim, Riva air intake and manifold upgrad, RD c3-11 (10psi), frozen boost type 9 and HKS bov, 160mm 13/23, Riva thru hull, RD intake grate and ride plate (1 shim in back, spacers still in), RD r2 ecu plus powershot
74.9mph @ 7600rpm (tiny tach) MikeFZR, 2009 FZR, Stage 1, 160lbs, 80*,65*, 400feet, trim 1 up, half a tank, powerfilter, stock SC, stock IC, manifold upgrade, FF exhaust, BOV, R&D grate, Jim's modified VX rideplate, Skat 13/23, stock ECU.
74.8 @ 7700 rpms, gmoeller, 09 FZR, 245 lbs, air 65, water 65, sea level, ocean, 3/4 tank, trim -2 up (rd-vts cam), 10 lbs boost, Riva air intake, intake man. upgrade, Riva FF exhaust, Riva Power cooler, Riva HKS BOV, Skat 13/25 prop (true), 81mm ring, R&D intake grate, VX rideplate, Riva sponsons, Powershot, C3-11 SC wheel, Riva SC shaft upgrade, R&D cooling kit, foam inserts removed
__________________
73.6mph @7600rpm, tysonfzr, 09'Fzr 1/3 tank....1 click up, Riva manifold upgrade kit-Riva power filter kit-Riva FF exhaust kit-Riva pro reduction nozzle 83mm-Riva rear xhaust kit-Riva power intercooler-Riva b1-Riva blow off valve-Riva engine breather kit-Riva SC heavy duty shaft-Riva fuel pressure regulator-Riva engine cooling kit-R&D intake grate-R&D pump seal kit-R&D ride plate-R&D powershot-Skat-Trak13/25
[email protected]rpm - R3_killa, '09 FZS, 250lbs, 82air/77water, salt water, 3/4 tank, nuetral trim, Riva Power Filter, Riva Manifold Upgrade, Riva FF Exhaust, R&D R4 Intercooler Kit, HKS BOV, R&D C3-11, R&D Intercooler Cooling Kit, R&D VTS Cam Kit, R&D Steering Nozzle, Skat-Trak 13/24, R&D Anti-cavitation Cone and R&D Sponsons. Stock E.C.U. and STD Fuel System.
__________________
72.3 @7750rpms, Caymansho, 09' FX SHO, Stage 1+, 170lbs, 80air/70water (salt), sea level, 3/4tank, Neutral trim, Riva Power Filter, Riva Manifold upgrade, R&D C1-SC wheel, R4 Intercooler, HKS-BOV, 13-23 Skat prop, Anti-cavitation cone, Waterbox mods (bored, not gutted), Riva FF Exhaust, Riva Intake Grate (pump seal kit), R&D Ride Plate (stock), R&D Sponsons, R&D Nozzle, stock ECU/Injectors.
[email protected] 7750 rpm, SHOdude, 67 air/70water temp, 220 lbs., neutral trim, 1/4 tank, Riva power filter & intake mod, Jim's R&D ride plate, Riva intake grate, fastest with stock 12/19 Prop, Riva sponsons
72.0 @ 7750 rpm, Superair, 08 FXSHO black, 195lbs, 67 air/ 60 water, 500ft, 3/4 tank, 3/4 trim, custom intake, Riva intake upgrade, XS intercooler, BOV, custom exhaust bypass, Riva Grate, Jim's ride plate with two shims front and rear, stock prop re-pitched to 13/23, boost gauge @ 6.5 psi, custom multiport vacuum adapter, stock ecu & injectors, hull ventilation.
[email protected]?? rpm, tobbesweden, 08 FX SHO Cruiser, lake temp 12C
Riva: intakeGrate, Power Filter.....R&D, BOV, Manifold Upgrade/CFM Kit, IC Cooling Kit, Pump Cone, Sponsons, Powershot, Skat 12/22, modded R&D plate
71.3 @ 7520 (tiny tach), mikeFZR, 2009 FZR, Stage 1, 150lbs, 75F, 75F, 400ft, half a tank, trim all the way up, riva air intake, skat 13/23 (true), riva ff exhaust, riva manifold upgrade, r&d grate+ppk.
[email protected] rpm, Onebadsho, 08 fxsho, 260lbs, air 70 water perfectly flat, neutral trim, 1/4 tank gas, sea level, mods = riva ff exhaust r/d intake (drop in), Riva manifold kit and rips air mod, riva pump seal kit and intake grate , 13/24 prop,
future -mods supercharger wheel and riva ecu hopefully be at 78 mph and 12lbs of boost
70.4mph GPS @ 7400 Wakeboardmuppet, 200lbs 2008 SHO 54air/46 water, saltwater, 3/4 tank, trim up 1, Riva power filter, Riva manifold upgrade, HKS BOV C3-11, gutted waterbox, FF Exhaust, 13/25 prop Lots more speed Coming!!!
[email protected]???? rpm. gSoto, FX SHO Blue 2008, 230 lbs, 82 air temp, sea level, 1/2 tank, neutral trim, Riva Power Filter, Modded FF exhaust, Riva ribbon, Jim's SHO rideplate modified, Riva Intake Grate, Stock ECU, Stock IC, Stock SC.
69.7& ??rpm, downstream, Camaudio, '09 FZS Black, Stock 7hrs, 190lbs, 70 air/50 water temp, 600' elevation, Full tank, neutral trim
69.0 MPH @7550 RPMs, Xrunner, 2009 FX SHO, Bone stock, 16.5 hrs, 180lb. rider, 59 degree air/48 degree H2o, Almost sea level, 1/8th tank, One click bow up trim, Fresh water that was glass
68.6 @ 7,xxx rpm, Mazy, '09 FZR, Stock, 160lbs, 80 air, 70water temp, 500ft, 1/4 tank, trim up 1, plate holes filled.
[email protected] ??rpm, Mikevv, '08 FXSHO Blue, Stock 50hrs, 175lbs, 80 air/water temp, sea level, 1/4 tank, neutral trim
67.8 MPH @7550 RPMs, Xrunner, 2009 FX SHO, Bone stock, 9.5 hrs, 180lbs. rider, 48 degree air/46 degree H2o, Almost sea level, Full tank, Neutral trim, Fresh water that was glass
67.8 @ 7500 rpm, Treeman, 09 FZR, 1click up full tank of 87
fresh water light chop no mods 67.7 @ ?rpm db2540, 09 FZS, shock, 70kg, 20'c air/water, sea level, 3/4 tank, trim up 1, saltwater.
FZS- STOCK
[email protected] 7550 rpm, doug78, 2009 FZR, bone stock, 149 lbs, 13 Celius, quarter tank, neutral trim, Saltwater
__________________
SOLD
Comment