Inducer impeller.

[Adam]

Ive been looking at the new Skat trak inducer impeller and since there is no way they will be available for old school GP1200's here is what I have done. Have not tried it yet but it should work, the idea is that it makes the pump process the water more efficiently. I used an old XO solas impeller for the inducer and will join it to a Skat trak 15/20 swirl impeller I had not being used.

[big raider]

interesting how are you fitting the 2 props into a wear ring? i put a 14/20 dynafly from an 04 gp 1300r in my raider-had to send it off to skat trak to weld an insert to fit the driveshaft but gained very little in performance - good luck keep us posted

[Adam]

I will be testing it on newyears day, I will keep you posted. The front impeller is smaller than the main one and just clears the tunnel housing.

[Glenn Briglio]

I will be testing it on newyears day, I will keep you posted. The front impeller is smaller than the main one and just clears the tunnel housing.

So what kind of results bro?

[Adam]

Well it loaded the pump so much ,it would not pull over 5000rpms! This impeller could only work on a boat with lots of power. Thats probably why only the highly modded FZR's with lots of boost can use them. It was worth a try !

[Glenn Briglio]

Well it loaded the pump so much ,it would not pull over 5000rpms! This impeller could only work on a boat with lots of power. Thats probably why only the highly modded FZR's with lots of boost can use them. It was worth a try !

Good to know, thanks for the info.

[Glenn Briglio]

Well it loaded the pump so much ,it would not pull over 5000rpms! This impeller could only work on a boat with lots of power. Thats probably why only the highly modded FZR's with lots of boost can use them. It was worth a try !

Just have to put a supercharger on that 2smoke. LOL

[Adam]

Update , I will have to try again as I was running with 75psi in number one cylinder !
Fixed the piston ring and in the process of rebuilding the engine , thought I had a rich fuel problem , stupid me for not checking the basics first.

[Glenn Briglio]

Cool, lets us know the results.

[Adam]

My my engine will pull the enducer impeller, rough water hook up is good . Triple pipes would be the best setup , im not a big fan of checking the pipes every few minutes. so raider pipe is the current option.

[88kawi5fiddy]

My my engine will pull the enducer impeller, rough water hook up is good . Triple pipes would be the best setup , im not a big fan of checking the pipes every few minutes. so raider pipe is the current option.

speeds and rpms?

[XLT Chad]

Also, what pitch are you running on each of them?