Location of beeper/warning speaker - 2022 FX skis

[Kingsfan33]

I hope this helps clarify things. I have a 2023 FX SVHO Cruiser.
I removed the side panels per the youtube video (above). The speaker and connector is located in the place indicated by svhooo here

https://www.greenhulk.net/forum/personal-watercraft-performance-skis/yamaha-pwc-performance/yamaha-pwc-performance-4-stroke/283275-?p=4621112#post4621112

If all you want to do is disable the speaker beeping completely, do not bother to remove the side panels. Its not necessary. The way to access the wire connector is to open the front storage area and then access the small compartment, pictured, by removing the 2 10mm screws and unplug the connector previously identified.
I wanted to wire the speaker to a switch so that the alarm speaker is enabled (overheating or other issues). When I get to the 45-50% fuel level and the gas alarm starts going crazy, all I have to do is flip a switch that disables the speaker as shown in attached video. I will install that switch in the dry compartment. Hope this helps someone.
Here is the video showing the switch working.
https://www.dropbox.com/s/j66zhng5muqjif1/20230419_161745.mp4?dl=0

[musubi]

10-4.

I tested it and oh yeah it works. It was louder since I had it right next to me after I plugged it in. Anyway, PM me you address and I'll check out the shipping costs.

[Highline9]

10-4.

[musubi]

If no one else has, I'd like to take that offer...Just to ensure compatibility, what model & year is your ski?

I have a 2022 FX HO model. But let me plug it in on my end first to make sure it works as it should.

[K447]

If no one else has, I'd like to take that offer...

If it doesn't work out for you, I might like to be next in line for the offer on the buzzer.

[Highline9]

I didn't end up installing the speaker I bought since I was able to find my existing one and muffle it. If you want the speaker I bought, I'll send it to you if you cover shipping.

If no one else has, I'd like to take that offer...Just to ensure compatibility, what model & year is your ski?

[K447]

- search for part # F1S-68341-00-00 on eBay.

FOD-U8341-00-00 seems to be the predecessor part number to FIS-68341-00-00

Unclear when FIS-68341-00-00 became the factory production part number

FOD-U8341-00-00
FIS-68341-00-00

[musubi]

Link does not work for me

Ah shucks you're right.
The next best is search for part #F1S-68341-00-00 on eBay.

[K447]

- see these search results:
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p3490034.m570.l1313&_nkw= F1S-68341-00-00&_sacat=0
...

Link does not work for me

[musubi]

Quick question (sorry I'm new to this): Why can't this be flashed? Is it not controlled by the ECU? Surely Deans Team/Riva has looked into this with all of the complaints???

I think the issue with the continuous beeping and the silencing of it can be programmed/flashed better. However, the issue with the system reading low fuel when it's not appears to be more of a hardware limitation. I would think you would need a longer arm to read more accurately throughout the tank full to empty range. But, bending the existing arm to at least read a more accurate "low fuel" would also be beneficial.

@musubi Can you provide details of where you found the buzzer on eBay?

Thanks

Sure, see these search results:

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p3490034.m570.l1313&_nkw=F1S-68341-00-00&_sacat=0

I didn't end up installing the speaker I bought since I was able to find my existing one and muffle it. If you want the speaker I bought, I'll send it to you if you cover shipping.

[TXDroneRacer]

Actually eBay has much cheaper used ones for sale.

@musubi Can you provide details of where you found the buzzer on eBay?

Thanks

[Gilberjj]

Quick question (sorry I'm new to this): Why can't this be flashed? Is it not controlled by the ECU? Surely Deans Team/Riva has looked into this with all of the complaints???

[musubi]

Seems to be in a different spot to where it is on mine (see my images above)?

To me it looks like the same location, but maybe yours is further back? Maybe you could take off the other side panel and see if it's more accessible. Right now, I have both panels off for the work I'm doing to my ski.
I didn't remove the speaker. I just stuck my hand in and stickied a small piece of hydro turf. Worked wonders.

I plan to install a switch on my buzzer so I can turn it off when it decides to get annoying

That's another way to work it. Is it possible to install a device to control the volume?

[musubi]

@musubi & @svhooo - what years are your skis? I have a 22, and will be trying this soon/before the weather gets warm. I'm at work, so just looking at pictures of mine...That side panel, under the hood/mirror is pretty easy to get off? Again, from pictures only, I can't see any screws/bolts...Is it a retainer clip type of deal?

Mine is a 2022 FX HO. That panel is real easy to take off, either side. You need to remove a few bolts and make sure to slide the panel off, not pull. Just need to look where the panel is mounted to for the bolts.

[Highline9]

@musubi & @svhooo - what years are your skis? I have a 22, and will be trying this soon/before the weather gets warm. I'm at work, so just looking at pictures of mine...That side panel, under the hood/mirror is pretty easy to get off? Again, from pictures only, I can't see any screws/bolts...Is it a retainer clip type of deal?