Above Forum Ads

Collapse

Announcement

Collapse
No announcement yet.

2011 242S - Which Solas on Port vs Starboard?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • 2011 242S - Which Solas on Port vs Starboard?

    Hello All,

    Helping a buddy with impeller replacements on his 2011 242S - based on internet searches we picked up the Solas YS-CD-13/22 and YS-CD-13/19

    The problem is that we're seeing conflicting info on which one should go on the Port vs Starboard side. I'm under the impression that the 13/22 should go on the Port side but an impeller sales site is showing the opposite.

    Can anyone please confirm which one is correct? I've searched and searched and can't locate a definitive answer.

  • #2
    pull the current impellers and check the pitch, you will know then.

    Originally posted by mikeclayton99
    Hello All,

    Helping a buddy with impeller replacements on his 2011 242S - based on internet searches we picked up the Solas YS-CD-13/22 and YS-CD-13/19

    The problem is that we're seeing conflicting info on which one should go on the Port vs Starboard side. I'm under the impression that the 13/22 should go on the Port side but an impeller sales site is showing the opposite.

    Can anyone please confirm which one is correct? I've searched and searched and can't locate a definitive answer.
    09 FZR Turbocharged
    12 FZR Turbocharged
    14 FZR Turbocharged
    15 FX Svho "Stockish"
    18 242 Limited S "Stockish"

    Elite Customs
    https://www.instagram.com/elite_customs_1/
    https://www.facebook.com/Elite-Customs-102854224401777





    Comment


    • #3
      Thanks for the reply. I do know from the parts fiche that it shows

      Starboard Part Number 6AP-R1321-10-00


      Port Part Number
      6AP-R1321-01-00

      But doesn't indicate the pitch. I tried to visually tell but I guess I am no good at that LOL.


      Comment


      • #4
        Originally posted by mikeclayton99
        I tried to visually tell but I guess I am no good at that LOL.
        Try placing the impellers next to each other and orient the blades the same way. Measure the height of the blades at the same location and one should be slightly higher than the other.
        '15 Kawi Ultra 310X
        '99 Kawi Ultra 150 (2)
        '10 Kawi Ultra LX, '13 Kawi Ultra LX, '13 Kawi Ultra LX parts 'Ski
        '04 Kawi STX 15-F, '06 STX 15-F (2)
        '91 Kawi Jet Mate
        '97 Yamaha Exciter 220 (Boat)
        '99 Yamaha Exciter 270 (Boat)
        '78 Nacra 5.2 Catamaran
        '05 Windrider WR-10 Trimaran, '05 Windrider WR-16 Trimaran
        ... and that's just the boats! I'm living proof that you can have too many toys!

        Comment

        Working...
        X
        😀
        🥰
        🤢
        😎
        😡
        👍
        👎