Tweet
After about 6 months finally back on water.
Replaced the following:
Pistons/Rings (OEM)
RIVA Gen 1 interncooler core
2 valves
Bearings
Installed
RIVA B1
RRFPR
Still breaking in but did a few quick sprints about 3 hours I did a few quick sprints (not staying WOT for more than abuot 5-6 seconds then graduly easing off) using my Galaxy S2 phone GPS was 70mph. Still on stock ECU with Boost Clamp and 13/22R Prop. Giving it another hour or so and then will open her up and see what needs to be done prop wise etc.
Big props to Don for getting me back on the water.
Some pics
bubbles are from the massive amont of WD40
Replaced the following:
Pistons/Rings (OEM)
RIVA Gen 1 interncooler core
2 valves
Bearings
Installed
RIVA B1
RRFPR
Still breaking in but did a few quick sprints about 3 hours I did a few quick sprints (not staying WOT for more than abuot 5-6 seconds then graduly easing off) using my Galaxy S2 phone GPS was 70mph. Still on stock ECU with Boost Clamp and 13/22R Prop. Giving it another hour or so and then will open her up and see what needs to be done prop wise etc.
Big props to Don for getting me back on the water.
Some pics
bubbles are from the massive amont of WD40
Comment