Manual shows 96 as having Keihin CDK II 38mm carbs.
Main jet MAG 138
Main jet CEN 140
Main jet PTO 135
Mid range jet 65
Slow...
xlint89
She likes the bike. But the ski gets her wet!!!!
Last Activity: Yesterday, 06:05 PM
Joined: 10-01-2006
Location: Cleveland OH
-
I like to use a little loctite and thread a small machine screw into the brass barb. I then use a cheap rubber vacuum hose cap from the auto parts store to cap it.
...Leave a comment:
-
OK, what year is the SL 900? That will matter when it comes to stock jetting and screw adjustments.
6 hours should be good to start looking at the wash pattern....Leave a comment:
-
On the blue engines, yes.
On the red engines, noLeave a comment:
-
Welcome to the Hulk.
According to the impeller chart, the Nujet PL-6.0 is recommended for the 900.
https://www.greenhulk.net/forum/personal-watercra...Leave a comment:
-
It's best you have clean threads on the bolts and holes. I like to wire wheel and thread chase everything prior to install. Much better to get true torque specs. Place the jugs...Leave a comment:
-
Welcome to the Hulk.
I love the SLT 780's, great all around platform.
1. The starter is in a hard to reach location. However, it is only attached with...Leave a comment:
No activity results to display
Leave a comment: