I agree ^^^^^
Pic on the left is way rich
Pic it the middle is rich
Pic on the right is slightly blurred, but I would say lean. I don't...
xlint89
She likes the bike. But the ski gets her wet!!!!
Last Activity: Today, 07:27 AM
Joined: 10-01-2006
Location: Cleveland OH
-
Manual shows 96 as having Keihin CDK II 38mm carbs.
Main jet MAG 138
Main jet CEN 140
Main jet PTO 135
Mid range jet 65
Slow...Leave a comment:
-
I like to use a little loctite and thread a small machine screw into the brass barb. I then use a cheap rubber vacuum hose cap from the auto parts store to cap it.
...Leave a comment:
-
OK, what year is the SL 900? That will matter when it comes to stock jetting and screw adjustments.
6 hours should be good to start looking at the wash pattern....Leave a comment:
-
On the blue engines, yes.
On the red engines, noLeave a comment:
-
Welcome to the Hulk.
According to the impeller chart, the Nujet PL-6.0 is recommended for the 900.
https://www.greenhulk.net/forum/personal-watercra...Leave a comment:
-
It's best you have clean threads on the bolts and holes. I like to wire wheel and thread chase everything prior to install. Much better to get true torque specs. Place the jugs...Leave a comment:
-
Welcome to the Hulk.
I love the SLT 780's, great all around platform.
1. The starter is in a hard to reach location. However, it is only attached with...Leave a comment:
No activity results to display
Leave a comment: