Team Bilford
Last Activity: Today, 09:39 PM
Joined: 07-26-2009
Location: Fort Worth, Texas
-
You could reintroduce the vented gases if you use a good oil separator rather than a simple catch can. The main purpose of the catch can on supercharged skis is to keep oil and... -
You simply are incorrect. Please review other posts that discuss the operation and benefits of using Bearing Buddies....Leave a comment:
-
Use Bearing Buddies and you won't have to deal with water or packing your bearings.....for decades. I finally pulled mine apart after 19 years and there was no water and the...Leave a comment:
-
Sorry guys, I didn't read the entire thread. I can understand everyone's issue. I have run my Sea Doos to the alarm and filled to test. It was just about the same as the manual...Leave a comment:
-
run it till it dies from fuel starvation and then fill to see what you actually can use.Leave a comment:
-
Mobil 1 4T 10W40 is another great oil and it is on sale for $9.99/quart at Advance Auto Parts. Many manufacturers put their motorcycle oils on sale during the spring. This is...Leave a comment:
-
I think the 2.5 gallon jug qualifies for a rebate, but you have to buy two of them. I did not read that part of the offer because, I freaking hate 2.5 gallon jugs....Leave a comment:
-
See if you can read the tag on the axle....Leave a comment:
-
Rotella Rebate is Back for 2023
For all of you folks that run Shell Rotella T6, there is a $20 rebate on three gallon purchases. After rebate, the cost per quart is about $4.00.... -
...Leave a comment:
-
Previous supply chain issues affected all of the manufacturers. I wonder if Kawasaki will still be able to increase production?...Leave a comment:
-
Yamaha Announces 2023 Production Cuts
March 7, 2023, Yamaha press release states that they cannot fulfill all of the dealer orders for YM23. They cited supply chain issues. These cuts will affect all Waverunner... -
Wouldn't 160HP on an Ultra be kinda a dog on the bottom end?
Range may be better on the Ultra than you think. I believe it has a bigger tank than the others. More...Leave a comment:
-
Since the hull is sealed up pretty tightly, do you really see any performance gains with these shorty intake pipes?
I have heard that you can pick up 100 rpm or so. With...Leave a comment:
-
Was that in the context of durability or handling?...Leave a comment:
-
You have done some good research on the CM Tech hulls. There were issues with the ST3 hulls in 18 and 19 where the fiberglass portion was not filling the mold completely leaving...Leave a comment:
No activity results to display
Leave a comment: