John's truck
Last Activity: 03-28-2023, 05:15 PM
Joined: 05-26-2010
Location: Connecticut
-
Finished waterproofing the splices and wrapping the harness. I just need to put on a Duestch connector on one and the injector/spark/sensor harness is finished. Next up is the...
-
Hoping to have the ECU harness finished up this week, and then possibly work on the hull side/12v load harness this weekend. I’ve been wrapping the legs that are done, just...
Leave a comment:
-
Boost leak/hose popped off/manifold split open/intercooler leaking.
or maybe it’s fuel, check your fuel pressure and check your injectors...Leave a comment:
-
The world needs more conversion skis. Well, and a new source of conversion motor mounts and driveshafts...Leave a comment:
-
Yeah I don’t know how you machine aluminum in circle and then have to clip off 6-7 chunks to balance it...Leave a comment:
-
This is a useful new tool already
...Leave a comment:
-
Supercharger ID help
Looking to figure out what my buddy has. It’s old charger from an 04/05 RXP he parted out (dropped a valve). It’s in a 215 housing bored out to 140mm (and epoxied since it...
-
Using the bare minimum of wires and punching them in to the new connector. I have to crimp the SeaDoo and Audi wires and snap them in but it’s almost done
Wires...Leave a comment:
-
New connector finally arrived, so I’m starting to swap the wires over to build the simple harness
...Leave a comment:
-
629 cam is much hotter than the 851. I would run the 629 and send the 851 out for a stage 2 regrind.
I would run the 15/20. I don’t like solas props that start...Leave a comment:
-
Well that’s good to hear. I looked again and did see that they say “made in North America” on the website....Leave a comment:
-
So where are they made? Where is the QC done? I’ve never seen any of those companies post pics/videos of the production and balancing of their superchargers. In fact I would...Leave a comment:
-
New? The blue anodized one on their website looks identical to every other made-in-China 135+3 clone wheel on the market (Aqua Jet, JL perf, eBay racing). They look like somebody...Leave a comment:
-
Got a new (to me) toy to play with. Once I get the hang of it and make some mods so I can print stronger plastics, I’ll start making brackets and mounts for the ski
...Last edited by John's truck; 03-19-2023, 05:42 AM.Leave a comment:
-
It sank
...Leave a comment:
-
Fixed the stator plug and harness side with fresh connectors. No more crappy looking auto store stuff. Engine side Ski side All together now ...Leave a comment:
-
I have one sitting in the assortment box just didn’t think to bring it to the storage unit...Leave a comment:
-
My “fix” on the stator wiring harness has been pissing me off ever since I did it. So I chopped it off. I’ll grab a triangle triple and make it look OEM
...Leave a comment:
-
Chopped the autozone connector off the CAS pigtail on the ski and crimped on pins and popped them in. Got a nice OEM style connector on the CAS now. IÔÇÖm going to do th...Leave a comment:
-
So I was thinking about the crank trigger connector that I had to splice on last year. Well I just crimped a nice duesch connector on the Microsquirt wires. Gonna put the corresponding...Leave a comment:
No activity results to display
Leave a comment: