Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Im sure you could call them and ask...
-
The plates aren’t even close. There are big differences between the stock plates and the riva.
...
- Likes 1
Leave a comment:
-
Unless you’re at high elevation or really hot air temps your 13/18 should turn more like 8300 RPM...
Leave a comment:
-
This is what Im doing to mine. Im going to guess 74-75 maybe....
- Likes 1
Leave a comment:
-
-
-
Should be able to. You may need a spacer under the fender mounts
Leave a comment:
-
He’s right. The sponsons are an amazing upgrade. The tight turning is a bonus but the rough water tracking is incredible with the sponsons...
Leave a comment:
-
Once you go to the intercooler you should be running a stage 2 tune. And if spinning over 8600 you’ll want to do the valve retainers...
- Likes 1
Leave a comment:
-
As long as the grease isn’t water or dirt contaminated it’s fine. I pull trailers 10s of thousands of miles a year. No bearing problems. I just took my ski trailer to Florida...
Leave a comment:
-
Seems the riva plate has a little more angle to it as well. Here’s the 2 plates back to back. By appearances, the Riva plate should be better all around
...
- Likes 1
Leave a comment:
-
I can’t answer that. My ski hasn’t seen water yet. But anyone who has tested the riva plate says its 2 mph better and better handling. Here are the 2 plates next to each...
- Likes 1
Leave a comment:
-
I believe the same plate fits the 2018 and older FX as well as the 2019+...
Leave a comment:
No activity results to display
Show More
Leave a comment: