ptscon
Joined: 07-16-2013
Location: Toronto
-
How do you find readability of AFR while riding? It looked quite small when I was doing some testing on the trailer.... -
Well, I can tell you for a fact that my '22 PX with color screen does not have a decimal point for the depth channel. To see full AFR you need to multiply the output by 10 so...Leave a comment:
-
One thing that I know will not work correctly is the display of AFR on the color dash due to it not supporting decimal point. Your 13.9 AFR will read "13" only.Leave a comment:
-
Unless you're venting to the outside of the hull, everything inside will get sucked back into the intake anyway.
To me you might as well have a vent hose close to...Leave a comment:
-
Go for a ride and compare wide open rpm with seat on and seat off a bit. If the extra air from the seat being off increases RPM then you know you have more potential available...Leave a comment:
-
What ski? 1630 motors use a metal mesh filter unlike 4tec.Leave a comment:
-
How big did you drill your openings? I'm looking at 2.5" wondering if its not taking out too much material, there's no heavy stuff above so it shouldn't be a structural issue...
Leave a comment:
-
Are you using a dark theme on your device? Background is white with black text by default....Leave a comment:
-
Has someone checked how much space there is under the intake manifold if the stock intake tube is removed? 4" hose really won't fit through there anymore?Leave a comment:
-
The green thread page navigation buttons need a tweak. There's no indication of what page you're currently on.
Neat, you can now paste images right into the post...Leave a comment:
-
Still getting the same error message. Maybe your low post count is restricting messages?Leave a comment:
-
16psi at 8800 sounds the same as the Riva/ET wheels. What are these advertised as?Leave a comment:
-
Hmm weird maybe its a forum bug but I can't send you a PM: "Yann has chosen not to receive private messages or may not be allowed to receive private messages. Therefore...Leave a comment:
-
Yann Thanks I'll pm you my email. Did you do any fuel/timing adjustments from the stock HPT file they provide or just removed the limiters?...Leave a comment:
-
1tommygunner1927 Hi, just testing the new @ feature
...
Leave a comment:
-
Can't help IDing that but man thats some shitty casting to require that much balancing.Leave a comment:
-
Maybe smaller icons on one line? Just the F and bird icons so they don't take up so much space and a little less in your face...
Leave a comment:
-
The Facebook/Twitter share icons definitely should go when you guys get to that.Leave a comment:
-
Those yellow wear rings go in very tight into the pump so perhaps it will close up that gap. If it doesn't than that's no good, the gap is too large.
You have to...Leave a comment:
No activity results to display
Leave a comment: