K7fxho
Last Activity: Yesterday, 09:31 PM
Joined: 07-11-2018
Location: Long Island, NY
-
Out of curiosity, what should a healthy svho compression psi be at or around?... -
First time doing the clutch took me about 3 and a half hours. And that was taking my time and double checking everything and looking up torque specs for the clutch bolt and oil...Leave a comment:
-
I just did a clutch for the first time on a 2018 fx svho. If you’re handy with tools it’s not that bad of a job. Just take your time and follow a video on youtube. There’s...Leave a comment:
-
If you are asking if you can mix and match the seats, yes you can. Personally I think on a FX a cruiser main seat with the standard (non-cruiser) rear seat looks good. Kind of...Leave a comment:
-
Make sure plugs are tight, check the coil packs. Sounds like one could be ripped. Inspect them and make sure they are seated correctly and the bolts are tightened. And then check...Leave a comment:
-
I had a riva seat installed on my old 2007 FXHO and I had the upholstery shop remove my
old seat cover and replace with the new. Didn’t really have any issues with the...Leave a comment:
-
Ok I didn’t know that. When they went to SMC I also thought it was Gel Coated. My mistake...Leave a comment:
-
I should add. Above the water line could be auto paint. But the hull it’s self no....Leave a comment:
-
The ski doesn’t have auto paint. It’s a SMC hull which means it’s Gel Coated. The reason the hull is black or whatever color it is, is because the gel coat itself has a...Leave a comment:
-
Pretty sure the 2022 FX is not a Nano hull. It’s SMC which I believe is Gel coated....Leave a comment:
-
Ribbon delete was done. I honestly think it’s the clutch but I wanted to rule out a boost leak before swapping the clutch. J pipe is tight....Leave a comment:
No activity results to display
Leave a comment: