GreenHulk Jr
Site Admin
Last Activity: 03-30-2023, 01:31 PM
Joined: 12-01-2020
Location: Morgan City, La
-
Also consider Exotic Signs and IPD Graphics. -
Low to mid 70s. The RIVA ride plate will help and the Solas 13/20 is necessary....Leave a comment:
-
You will be much higher than 8600 RPM with a 13/18 impeller and the mods you have installed. I'd use a 13/20 Solas impeller as a starting point to keep the RPM down. You will...Leave a comment:
-
After removing the top deck there is another cover that has to be unbolted from the hull to get engine access.
...Leave a comment:
-
You may be able to get away with unbolting the rear portion of the deck and lifting it high enough to remove the engine cover and get access to it. Chances are you will have to...Leave a comment:
-
Definitely want to be using a Stage 2 tune with the Fizzle intercooler. You should absolutely install titanium valve retainers as well, either of these will work great:
...Leave a comment:
-
This would be the case for a Sea-Doo but not for a Yamaha. The SVHO has an oil separator from the factory and very rarely will oil come out of the breather hose like a Sea-Doo;...Leave a comment:
-
You do not want to vent the crank case vapors back into the intake. Routing the vent hose to the intake would provide better suction BUT you are increasing the chances of detonation....Leave a comment:
-
Absolutely! I think every FX needs the RIVA ride plate, intake grate, and sponsons. Having all three installed surprised me and made the handling of the ski incredible.Leave a comment:
-
The Solas 13/18 is absolutely worth it. While you're at it, add the RIVA ride plate and intake grate. All three make a huge difference....Leave a comment:
-
I've just changed the link color from green to black. This should be easier for everyone to read....Leave a comment:
-
You will be fine drilling those holes. I have a much larger hole in the same spot and I don't have any structural issues....Leave a comment:
-
It will definitely be 100+ MPH....Leave a comment:
-
GreenHulk Jr GPRXP
I picked up a GP1300R hull a few weeks ago to start another project. Over the last week I stripped the hull and made the hull cuts to fit the Sea-Doo engine; there is still quite...
-
Thanks for pointing this out. I'll get it fixed....Leave a comment:
-
It is not a forum bug. I have been using PM's successfully since moving to the new server. Yann has private messaging disabled in his user settings....Leave a comment:
-
The VT1100 will be just fine as long as you have the RIVA fuel pump and fuel pressure regulator....Leave a comment:
-
I’ve been using the RIVA XX impeller for almost a year now and it definitely flutters at partial throttle. Other than that it performs great and I’ve seen 89 mph consistently...Leave a comment:
-
Just got off the water with an updated tune. AFR is much better. Unfortunately, it is a bad air day so I didn't manage the best results. 85-90% humidity, with an approximate density...Leave a comment:
-
I think you have this ski confused with another one that sank recently. There was a video of another RXPX hitting a course marker; the counter weight swung up and cracked the...Leave a comment:
No activity results to display
Leave a comment: